资源列表
tracker1
- 基于S3c44b0的自主式小车导航及寻迹程序，，在ADS下编译通过，并少些进flash,能够完全运行-S3c44b0 based on the autonomous vehicle navigation and tracing procedures, in which they were compiled by ADS, Progressive and less flash to be able to completely run
digtalmusicplayer
- 在S3c44b0的内核中,在ADS环境下.将此程序烧写进去,该乐谱的十六进制代码,可以实现各种音乐的播放-S3c44b0 in the kernel, in the ADS environment. Burning into this program. The scores of hexadecimal code, can achieve a variety of music players
mstartup
- HMS30C7202的初始化启动工程文件和说明都有-start construction documents and annotations have
YL2440A_MON
- YL2440的USB驱动文件，这是配套光盘中COPY出来的-YL2440 USB drive, which is supporting the CD COPY the
ex1_flash
- 超级棒的ARM7原代码，仔细研究，收益菲浅！-super rods ARM7 original code, careful study, revenue Philippine shallow!
NU11-CFCard
- M22A 系列嵌入式工控板中的文件系统操作CF卡程序-M22A series of embedded computer boards in the file system operating procedures CF card
UM050101M22ASeriesEVBoard
- M22A Series EV Board、M22A 系列评估板 用户手册，带原理图及使用说明，对开发LPC2200系列产品具有一定的参考价值-M22A Series EV Board, M22A series Evaluation user manual, with drawings and the use of product development LPC2200 series has some reference value
usbfirmwareupgraderlpc214x
- 飞利浦的ARM芯片LPC214X的usb固件升级程序，带源码。-Philips LPC214X ARM chip the usb firmware upgrade procedures, with the source code.
8088verilog
- intel 8088 架构的verilog代码，可以综合下载，在fpga上实现8088调试。-intel 8088 verilog structure of the code can be integrated download, fpga achieved in 8088 debugging.
01122422
- AVR仿真器制做全过程,我已经成功做出两个,现在还在使用.里面有原理图,代码.-AVR simulator system to the whole process, I have made two successful, Now is still in use. There are drawings, code.
ATMEG8PWM
- ATMEL公司的AVR芯片系列,MEGA8的PWM波形变化演示程序,可以更加容易了解MEGA8的PWM的程序.-ATMEL AVR chip companies series MEGA8 PWM waveform changes in the demonstration program, it can be more easily understood MEGA8 PWM procedures.
stepperfourandsix
- 这个例子做的是去年全国电子电子设计大赛E题，悬挂运动控制系统（E题），我只做了画线和画圆两个部分，纯粹是玩，所以精度不是很高，终点定位精度误差差不多0.5cm左右，画圆在两个斜率无穷大区误差较大需要修正。 一开始我用的是L297+L298驱动，感觉脉冲相位控制比较麻烦，后来想到avr相对51的速度，用B口模拟脉冲，L293驱动。电机我用的是两个42BYG四相八拍六线步进电机，资料很好找。 这个试验做起来可能有点麻烦，比赛的时候需要特定的板子，就象附件E题里所示，注意电机转动的时候