资源列表
USB-BLASTER_FX2_68013_SCH_PCB
- 利用CY7C68013A制作的Blaster下载线，里面有固件，还有Protel格式的原理图和PCB文件，可以直接做板使用-CY7C68013A produced using the Blaster download cable, which has the firmware, as well as the format of Protel schematic and PCB files can be directly used to do board
STM32_IIC
- 软件模拟STM32 IIC，经测试，可以正常读写EEPROM。-Software simulation of the STM32 the IIC has been tested, normal read and write the EEPROM.
IAP_Program.110918b1
- 這是一個應用於NXP LPC系列的IAP成是源碼IAP-LPC series IAP
mcb1700-schematics
- LPC1768开发板原理图 LPC1768 SCH-LPC1768 development board schematics LPC1768 SCH
yuv2rgb001
- yuv2rgb, 一个老外写的arm上yuv转换rgb的库，支持YUV422,420P,到RGB32，RGB24,RGB16的转换。针对arm写了汇编优化，性能较高-yuv2rgb library in ARM CPU. Both C and assemler source.
TFTP
- s3c2440的tftp测试程序，使用ADS开发，从底层开始，很简单，简洁。-s3c2440 the tftp testing procedures, the use of ADS development, starting from the bottom, very simple and concise.
TinyM0-CAN
- NXP LPC11C14 CAN 测试源码-NXP LPC11C14 CAN test source
Jlink-V8
- Jlink V8的文件，很不错的,供大家参考-Jlink V8 document, it is good for your reference! !
RA8806
- RA8806LCD显示,可实现汉字图片等显示，同时具有触摸模块-RA8806LCD display can be realized characters pictures show both a touch module
STM32dianbiao
- stm32 电表程序，非常实用,计量精度非常高，可靠性稳定-this stm32 powermeter programm code
simulator
- 开源的基于SystemC的模拟器，可以模拟ARM CPU, Cache, DDR，NOR, NAND, 时序和功耗均可以正确模拟。-This simulator is a cycle-accurate system-level energy and timing simulator. Developed by Embedded Low-Power Laboratory, Seoul National University. The simulator’s underlying kernel is
TFT-LCD-driver
- ILI9328 2.5寸TFT液晶屏幕驱动，含清屏函数，可将图片直接满屏写至TFT,TFT采用八位并行总线接口，工程用IAR5.4编译-ILI9328 2.5-inch TFT LCD display driver, with clear screen function, you can write images directly to full screen TFT