资源列表
ADC-key-procession
- 用51的MCU的IO方式控制74HC595驱动8位数码管(4位共阴4位共阳)使用Timer0的16位自动重装来产生1ms节拍,程序运行于这个节拍下, ADC按键和行列扫描按键均影射成统一的键码, ADC按键键码为1~16, 行列扫描按键键码为17~32.-Way with 51 MCU IO control 74 hc595 are needed drive eight digital tube (4, a total of four Yin Yang) Timer0 16 automatic
zhanjian_jichuqiban
- 这是战舰STM32开发板寄存器版所有的源代码，可以学习一下他们写的代码。-This is a battleship STM32 development board registers versions of all the source code, you can learn about the code they write.
RFID
- arduino uno+rc522读卡、写卡-arduino uno+rc522 read and write card
HtrcLpc214x
- HTRC110 hitag reader for lpc214x. 125KHz RFID applications.
STM32L_DS3231
- 1.stm32l152rbt6与DS3231时钟通讯。 2.数据存入flash-1.stm32l152rbt6 clock communication with the DS3231. 2. The data is stored in flash
LCD.X
- PIC16F1937 LCD驱动代码 包含按键扫描代码 MPLAB打开-PIC16F1937 LCD驱动代码 包含按键扫描代码
ClockSync
- 基于COMTEX-M3的IEEE1588,irigB对时的源程序，包括GPS对时程序，并将对时的结果写入FPGA中-Based COMTEX-M3 of IEEE1588, irigB on time source, including GPS for the program, and writes the results when the FPGA
MPC5634M-FlexCAN-SimpleTX
- MPC5634的CAN发送程序，接收通过中断，与之类似-MPC5634 CAN-sending program, received by an interrupt, with similar
xiaoche
- 基于stm32单片机的小车控制及驱动程序-Based on the stm32 MCU control car and driver
SHT21-C51
- SHT21的温湿度数字输出HTU21D详细介绍: 产品简介: 基于法国Humirel公司高性能的湿度感应元件制成,新一代HTU21D温度和湿度传感器在尺寸与智能方面建立了新的标准:-Temperature and humidity sensor SHT21 chip HTU21D test comparison with distinction
stm32-sdPuart
- Finally I got it working properly. Reading SDcard was very awesome for me for first time, so I decided to make a library for STM32F4xx devices and post it to my website. It’s basically just communication interface between STM32F4 and FatFS library by
dac7728_unit
- DAC7728的控制程序，经过顶层封装程序，可对此代码进行参数配置，实现芯片控制输出的功能。-the verilog file of controlling DAC7728