资源列表
IAP-UART
- stm32f10x 基于串口通讯的IAP程序-stm32f based serial communication IAP program
19_ucos2_key_beep2
- 用的神舟3号的板子，搭配有ucos的移植例程，有SD驱动，触摸屏驱动。做毕业设计很重要哈-With the board Shenzhou 3, packed with ucos transplant routines, an SD drive, touch screen driver. Kazakhstan is very important to do graduate design
stm32_obd
- 基于ST单片机STM32F10X的OBD程序,是基于底层驱动的源程序，与上位机采用串口通讯，把诊断指令发到CAN网络并返回结果给上位机-Is based on the underlying driver source OBD procedures ST microcontroller STM32F10X based, serial communication with the host computer, diagnostic commands sent to the CAN network a
jisuanqi
- 在STM32上实现计算器功能，可实现表达式计算-Achieve calculator functions on the STM32, can achieve expression uation
9200doc
- 9200的开发资料：包括uboot，linux等
DigiTech-Pro-1.1-programmers-manual
- DigiTech Pro Programmers guide (for Digitech Pro device)
STMF103ZET6-MP3-player-experiment
- 基于STM32F103ZET6芯片编写的MP3播放器，带触摸屏，在KEIL4环境下编写，可直接使用。初学者看一看会有帮助。-Based on STM32F103ZET6 chip to write the MP3 player, with a touch screen to write in KEIL4 environment can be used directly. Beginners take a look at that would be helpful.
uboot1.60429
- 本源码是uboot在bf537芯片上的移植，它是在vdsp++5.0环境下编译的，支持uboot绝大部分常用的命令，方便剪裁-The source is in uboot for bf537 on chip transplantation, it is vdsp++5.0 compiler environment, and support the vast majority of commonly used uboot order to facilitate the tailoring
test_2
- STM32F407 ILI9320/ILI9325液晶驱动 4x4 键盘驱动 精密PWM波输出驱动 GPIO设置-failed to translate
STM32-V3.5-LIB-Pro
- stm32 3.5固件库模板，适合103MCU，移植其他MCU修改启动文件即可-stm32 3.5 firmware library template, suitable 103MCU, transplant MCU modify the startup files can
jni_temp1
- 安卓JNI开发，代码具有很好的研究意义，值的初始学习与入门-Android JNI development, code has the very good research significance, the value of the initial learning and get started
stm8l_tim4_eg_sources
- stm8l的例子程序,是timer4的功能演示-stm8 timer4 example sources