资源列表
NO.3
- 此段代码读取一个浮点数，并且首先以小数点计数法，然后以指数计数法打印之。-This code reads a floating point number, and first in decimal notation, exponential notation and then print it.
NO.5
- 此段代码为首先要求用户输入名字，然后要求输入姓氏。在一行打印输入的名字，在下一行打印每个名字中字母的个数。把字母个数与相应名字的结尾对齐。-This code is required to enter the name, and then asked to enter the last name. Enter the name printed on one line, the next line print the number of letters in each name. The numb
NO.4
- 此段代码要求输入身高（以英寸为单位）和名字，使用float类型，使用/作为除号。-This code requires input height (in inches) and the name, the use of float type, use/as the division sign.
Serial_read
- 嵌入式Linux开发板上的串口数据采集程序,包括采集数据的平均处理与打包成XML-Embedded Linux development board serial data acquisition procedures, including collecting data, the average processing and packaged into XML
KeyBoard
- ARM7架构嵌入式开发板PXA270上的键盘驱动以及测试程序-ARM7-based embedded development board PXA270 keyboard driver and testing procedures
LCD_Control
- 嵌入式Linux开发板PXA270的LCD屏幕驱动与测试程序-PXA270 embedded Linux development board LCD screen driver and testing procedures
LED_Array
- 嵌入式Linux开发板PXA270的LED点阵驱动程序与测试程序-PXA270 embedded Linux development board LED dot matrix driver and testing procedures
TouchScreen
- 嵌入式Linux开发板PXA270的LCD屏幕驱动与简单测试，之前传那个是较复杂的LCD测试程序-PXA270 embedded Linux development board LCD screen with a simple test drive, pass before that is a more complex LCD testing procedures
my-clock
- QT写的数字时钟，可移植到嵌入式Linux设备上运行-QT write digital clock that can be ported to run on embedded Linux devices
clock_wyy
- 嵌入式GUI图形界面 计时器 包括年月日 时分秒 且均可以调整-Embedded GUI graphical interface timers including the date, hour and both can be adjusted
GyroRecv-sim
- 基于Tinyos的无线传感网中基站接收源代码，具有简单适配预定结构体接收转发至串口的功能，适用于几乎所有的无线传感节点，如shimmer2r，iris等-A simple Tinyos-based base station source code in wireless sensor network, applicable to almost all wireless sensor nodes, such as shimmer2r, iris, etc.
diancai_xunwen_dinggao
- 嵌入式GUI界面 点菜系统 包括菜单 账单重选修改等-Embedded GUI interface system includes a la carte menu, modify the re-election bill