资源列表
NO.4
- 此段代码要求输入身高（以英寸为单位）和名字，使用float类型，使用/作为除号。-This code requires input height (in inches) and the name, the use of float type, use/as the division sign.
Serial_read
- 嵌入式Linux开发板上的串口数据采集程序,包括采集数据的平均处理与打包成XML-Embedded Linux development board serial data acquisition procedures, including collecting data, the average processing and packaged into XML
KeyBoard
- ARM7架构嵌入式开发板PXA270上的键盘驱动以及测试程序-ARM7-based embedded development board PXA270 keyboard driver and testing procedures
LCD_Control
- 嵌入式Linux开发板PXA270的LCD屏幕驱动与测试程序-PXA270 embedded Linux development board LCD screen driver and testing procedures
LED_Array
- 嵌入式Linux开发板PXA270的LED点阵驱动程序与测试程序-PXA270 embedded Linux development board LED dot matrix driver and testing procedures
TouchScreen
- 嵌入式Linux开发板PXA270的LCD屏幕驱动与简单测试，之前传那个是较复杂的LCD测试程序-PXA270 embedded Linux development board LCD screen with a simple test drive, pass before that is a more complex LCD testing procedures
my-clock
- QT写的数字时钟，可移植到嵌入式Linux设备上运行-QT write digital clock that can be ported to run on embedded Linux devices
clock_wyy
- 嵌入式GUI图形界面 计时器 包括年月日 时分秒 且均可以调整-Embedded GUI graphical interface timers including the date, hour and both can be adjusted
GyroRecv-sim
- 基于Tinyos的无线传感网中基站接收源代码，具有简单适配预定结构体接收转发至串口的功能，适用于几乎所有的无线传感节点，如shimmer2r，iris等-A simple Tinyos-based base station source code in wireless sensor network, applicable to almost all wireless sensor nodes, such as shimmer2r, iris, etc.
diancai_xunwen_dinggao
- 嵌入式GUI界面 点菜系统 包括菜单 账单重选修改等-Embedded GUI interface system includes a la carte menu, modify the re-election bill
signal
- 个人编写的linux下信号编程实验源码，针对信号进行捕捉、函数处理，对于嵌入式平台下应用有一点参考价值-Written by individuals under linux programming experimental source signal for signal capture function processing, there is little reference value
shan
- 单片机80C51控制程序,控制ADC0808把模拟信号转换成数字信号！-80C51 MCU control procedures, control ADC0808 converts the analog signal into a digital signal!