资源列表
chap02
- 《C++ GUI Qt3编程》书中源码-第二章-" C++ GUI Qt3 Programming" book source- Chapter II
ATT7022B_CHECK
- 电表芯片ATT7022读取数据与电表校验代码-Meter and meter reading data chip ATT7022 check code
vidca
- 此程序是一个通用的摄像头抓图程序，只要在装有linux系统并而己安装有arm-linux-gcc的开发环境下编译即可运行。-This procedure is a generic camera capture process, as long as the installed linux system and has been installed and the arm-linux-gcc compiler development environment to run under.
s3c2410
- nand驱动范例,驱动nand flash芯片。学习flash驱动的很好源码！-Examples of NAND driver, driver nand flash chip. Learn flash drives a good source!
spi_lcd_fbdev.c
- Nokia 3310 linux spi based frame buffer device driver
dm9000x
- u-boot下dm9000a的驱动,b-boot的版本为1.1.6。能够稳定工作，最高速度达到1MB-dm9000a driver for uboot
imframe
- QT4 在嵌入式linux中虚拟软键盘加输入实现-QT4 linux implementation of soft keyboard
2.8GPRS
- ARM9s3c2410LINUX嵌入式系统设计与实例开发实验--GPRS通讯实验-ARM9s3c2410LINUX Embedded System Design with examples of experimentation -- GPRS Experimental Communication
AudioDrv
- 音频处理程序，如果+dsp最好了，姑且先用着吧,毕竟能听到过16khz声音的人少-audio processing procedure, if dsp best, given to using a bar, After all, can be heard the voice of the 16 khz less
tw2864
- TW2864源码 在HI3512开发环境下-TW2864 Source code In HI3512 development environment
lib
- MX21 CSI driver user mode library * * This program is free software you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation either version 2 of the Licen
ble_dongle_beacon
- 1、基于蓝牙sdk扫描低功耗蓝牙设备； 2、连接蓝牙设备，密码输入； 3、修改设备名称和密码； 4、发送控制命令；-1.scan ble devices based with BLE SDK 2.connect ble device and input password 3.modify device name and password 4.send control command.