资源列表
embeddedlinuxpapersvolum5
- 嵌入式Linux论文集５embedded linux papers volum５（学习嵌入式Linux的好资料，辛苦积累的结果）-collection 5embedded linux papers volum 5 (Embedded Linux learning good information, painstaking accumulation of results)
C-Embedded-Systems-Programming
- 几乎所有的嵌入式软件开发都使用了C 语言，这本书就是教你怎样在嵌入式系统中使用C 和C的派生语言，C++。-Almost all of the embedded software development use the C language, this book is to teach you how in embedded systems using C and C-derived language, C++.
LinuxDeviceDrivers3_all_example_code
- Linux设备驱动程序所有的例子代码和帮助文档-Linux device drivers for all the example code and help documentation
AT91USBFramework-Core1.02+MSD1.0
- This software package contains the USB framework core developped by ATMEL, as well as a Mass storage driver. The MSD driver uses the internal flash of the chip to operate as a disk-on-key. The following files are included : - core/ -&
uboot
- S3C2440 ARM9芯片的启动代码,包括NAND FLASH,NOR FLASH ,DM9000见外卡,TFT屏的启动有初始化的相关原代码-S3C2440 ARM9 chip startup code, including NAND FLASH, NOR FLASH, DM9000 see the wild card, TFT screen boot source code associated with initialization
bootloader
- u-boot的源码（支持USB烧写，支持yaffs，支持tftp，支持自己更新开机logo等特性）-u-boot source code (support USB programming, support yaffs, supports tftp, boot logo, etc. to support their update feature)
ZLG_ARM7_Drivers_and_Sources
- 周立功ARM7试验箱，基于ucLINUX试验的所有源代码。
DianCai
- 1、手持点菜终端部份 点菜：根据顾客要求点菜，并经过顾客确认发送，收到服务器发送的确消息， 告知顾客点菜成功。 加菜：根据客户需求随时进行加菜操作。 退菜：根据客户需求随时更新菜单，如果菜品已加工，则不能退菜。 2、前台部份 结帐：当顾客用餐完毕后，到前台进行结帐。 订桌：若有顾客需要预订时，可留下相关信息进行预订。 查座：有顾客来用餐时，先查是否
minigui-1.6.2
- 飞漫公司开发的开源MiniGUI-1.6.2版本源码，可移植于UCOSII，Linux等系统中，其中本人以用于linux系统。-Feynman developed by the open source of MiniGUI-1.6.2 version of the source, portable in UCOSII, Linux and other systems, which I used for the linux system.
studentAdmin
- 文件读写学生管理系统（初步）,自己做的小程序，主要用文件读写，逻辑可参考-student Admin system,my test code
Sample
- 使用ARM-LINUX-QT4.6.1的手持式信号采集仪的信号采集、波形显示、管理的界面程序-Using the ARM-LINUX-QT4.6.1 handheld signal acquisition instrument signal acquisition, waveform display, management interface program