资源列表
5.1_color_lcd_test
- 基于ARM，S3C2410的液晶显示，实现ASCII码，汉字，横线，竖线的显示-Based on ARM S3C2410 LCD ASCII, Chinese characters, horizontal line, vertical line display
hardware
- 2440相关开发板的所有裸机程序,包括MMU NAND LED LCD 串口-2440 development board all bare metal procedures, including the MMU NAND LED LCD serial
exm
- 字符设备驱动程序 涵括LCD LED 按键 串口等设备驱动-Character device driver covers LCD LED key serial device driver
2th
- 最简单的bootloader的编写步骤： 1. 初始化硬件：关看门狗、设置时钟、设置SDRAM、初始化NAND FLASH 2. 如果bootloader比较大，要把它重定位到SDRAM 3. 把内核从NAND FLASH读到SDRAM 4. 设置"要传给内核的参数" 5. 跳转执行内核 -The easiest the bootloader preparation steps: 1. Initializes the hardware: Off watchdog, set
gpio-i2c1-debug.tar
- 海思Hi3515通过GPIO口来控制电机的方式实现云台控制-Hass Hi3515 way to control the motor via the GPIO port PTZ control is accomplished. .
Cbuitidig
- 可以实现设置字体颜色标题等文件属性及和打印机连接打印文件-You can set the font color title the file attributes and print the file and printer connections
ran_num_generator.tar
- vhdl random numbergenerater
zImage_2.6.25.8_Q43_20100601
- 嵌入式linux烧写镜像文件,适合天嵌tq6410开发板-Embedded linux programmer mirror to file suitable day to embedded tq6410 development board
pwmtest
- PUTTY 串口通信 + - ESC 控制蜂鸣器 -Serial communication control buzzer
arm
- arm的讲义和笔记和S3C2440中文手册 附有源码 pdf书籍-arm of handouts and notes and S3C2440 Chinese manual with source pdf books
apps
- LINUX下的应用程序，通过调用驱动的接口进行应用程编程的，很不错的参考程序-AD change
AndroidSeriportTest
- android下的串口应用程序，包括JNI层的实现-android serial port application, including JNI layer to achieve