资源列表
Generic_8052_ISD51
- Generic_8052_ISD51源码,仿真器代码!想DIY 仿真器的有福了-Generic_8052_ISD51 source, Simulator code! DIY simulator to the blessed
S16-4
- 四位LED数码显示驱动管动态扫描驱动单片机源程序-four LED digital display driver Dynamic scanning driver single-chip microcomputer
S18-1
- LCD液晶显示驱动模块液晶显示驱动单片机源程序-LCD display driver module LCD driver single-chip microcomputer
S19-3
- LCD液晶显示驱动模块液晶显示计时时钟单片机源程序-LCD display driver module LCD MCU time clock source
S19-2
- LCD液晶显示设备运行状态自动显示器单片机源程序-LCD display device running automatically displays SCM source
ZYMCU
- 用四位LED数码显示管显示实时时钟单片机源程序-with four LED digital display of real-time clock source SCM
can--tiaoshi
- 系统can地址为550,用于can系统测试,应用T0定时器每隔1s向can总线发送一组数据:数据长度为8个字节, 首字节为05H,第二个字节为累加变量,每秒钟数值增加1,-system can address 550 for the test system can, Application T0 1s to every timer can send a bus of data : data length of 8 bytes the first byte of 05H, the s
812
- 用于工业控制方面.常见的板卡操作.板卡型号为812板.-for industrial control. Common card operation. Card Model 812 board.
I2CTOeeprom
- 使用软件模拟Ｉ２Ｃ与ＥＥＰＲＯＭ通讯的子程序-use of software simulation I2C EEPROM communications with the subroutine
SignalF020
- C8051F020的全面应用,包括两个UART口、SPI、I2C，所有I/O均用上。-C8051F020 comprehensive application, including two UART port, SPI, I2C, all I / O is used.
gps_f023_1103
- C8051F023的应用，主要功能是通过串口1读取GPS接收机信号，在有INT0的响应时，通过串口2发送。-C8051F023 applications, the main function is to read through a serial GPS receiver signal, INT0 in response, sent through the serial port 2.
readDS18B20temp111
- DS18B20 ying yong de wen jian ben wen wei asm format please use keil to open it -DS18B20 ying yong jian de wen wen wei ben asm c51 format please use it to open