资源列表
Software_code_principle_and_procedure_of_infrared_
- 红外遥控器软件译码原理和程序1 红外一开始发送一段13.5ms的引导码，引导码由9ms的高电平和4.5ms的低电平组成，跟着引导码是系统码，系统反码，按键码，按键反码，如果按着键不放，则遥控器则发送一段重复码，重复码由9ms的高电平，2.25ms的低电平，跟着是一个短脉波. -infrared remote control software decoding procedures for a principle and begin sending an infrared section
gsm_schdoc
- TC35I短信机电路图DXP2004绘制-impoundments SMS Machine Drawing circuit DXP2004
i2c_guifan_example
- i2c总线规范，以及51单片机的例程，很实用-i2c Bus specification, and the MCU 51 routines, practical
I2C-Qing
- C51的I2C代码,针对PHILIPS的时钟芯片与24C32-C51 I2C code PHILIPS against the clock chip and 24C32
pckeyboard
- 很好的键盘驱动程序，我测试过不错，希望同行能有所帮助-good keyboard, and I tested good, and he hopes peers can be helped
CAIJIXITONG
- 用单片机89c51及AD转换0809设计多路数据采集系统-89c51 MCU and 0809 AD converter design multi-channel data acquisition system
ST7920LCD
- msp430 st7920驱动程序 并口 包含注释-Controller Driver Parallel contains Notes
12232Abusdriver
- 与51单片机相关，用于与上位机之间的通信驱动-associated with the MCU 51 for the PC and communications between the driver
SPEED-TEST
- 汽车速度测试器,以1米的间隔放置光感应器,含3个按键,RESET START/STOP/ 三位数码显示-vehicle speed test device to a meter intervals optical sensors placed, with three buttons, RESET START / STOP / 3 digital display
n.m
- 4-5-5bp网络，控制输出的PID的三个参数。。。实现控制功能。-4 - 5 - 5bp networks, PID control the output of the three parameters. . . Control functions.
at24c128
- at24c128读写源程序.用ASM写的C函数，可以直接用C51调用。-at24c128 literacy source. Using ASM functions written in C, can be called directly with C51.
TIME-SYNC-2051
- 工厂时间同步的单片机的源程序,驱动6个数码管-factory SCM time synchronization of the source, drive six digital control