资源列表
zzcl_vhdl
- VHDL编写的八位9值信号的中值输出方法，特点是不采用流水或状态机设计，因此速度较快-VHDL prepared by eight of the nine value signal output value method, which is characterized by not using water or state machine design, therefore faster
1621a
- PDC605驱动程序,用于液晶屏驱动,采用SPI接口,适合单片机,LINUX驱动程序用-PDC605 driver for the LCD driver using SPI interface for microcontroller, Drivers using LINUX
keyenter
- 这是一个单片机键盘响应程序，主要用于单片机设计中对键盘的编程，使得单片机能够显示键盘的按键-This is a microcontroller keyboard response procedures, mainly for the design of single-chip microcomputer keyboard programming, SCM makes the keyboard can display buttons
51-system
- 51上运行的实时操作系统,原代码，有详细说明．-51 running real-time operating system, the original code is described in detail.
colorSend
- 大厦LED流水显示的程序，刚刚编完，可通过修改循环的次数和数据表来构成不同的显示效果-LED shows the procedure, the newly produced, cycle through changes in the number and composition of data tables show different results
time123456
- 智能计数器，对外部信号脉冲进行计数，并将脉冲个数显示出来。 基本要求：计数至少65536个脉冲，并将脉冲个数显示出来。 -intelligent counter, the external signal pulse counting, pulse number will be displayed. Basic requirements : at least 65,536 Count pulse, and pulse number displayed.
点对点串行通信
- 用于串口通信的源代码 用c编程的程序 希望对大家有用-for serial communication with the source code c programming procedures hope useful for all
mp3shejiyuanlitu
- 对于有想自己DIY mp3的同志们要注意了，参考参考别人的设计思想也是有必要的，希望这张原理图对大家有帮助！-for a DIY mp3 to their comrades to attention, others refer to the reference design is also necessary, I hope this diagram to help you!
STC_ISP_setup
- STC isp应用程序，ISP功能，好东西 S TC isp应用程序，ISP功能，好东西 -STC isp applications, ISP, good things S TC isp applications, ISP, the good stu
CANIntC
- Microchip PIC18F 设备驱动代码 CAN部分-Microchip PIC18F family CAN device driver code part
I2CSInt
- Microchip PIC18F 设备驱动代码 I2C部分-device driver code I2C part
XLCDC
- Microchip PIC18F 设备驱动 LCD部分-PIC18F family some LCD driver