资源列表
Timer
- ADuc845的定时器测试程序.包含定时器0、定时器1和定时器2的中断程序-the timer interrupt of ADUC845
shumaguanjingtaixianshi
- 52单片机c语言程序编写，数码管静态显示程序编写，有详细注释说明-52 microcontroller c language programming, digital static display programming, there are detailed notes
paomadeng
- 微处理器采用ATmega16，是Atmel公司生产的高性能8位微处理器，编译软件采用AVRstudio，实现PB口8位跑马灯，程序指令有文字说明-Microprocessors ATmega16, Atmel Corporation is a high-performance 8-bit microprocessor production, compiling software uses AVRstudio, realize the PB 8 marquees, program instruct
DAINJI
- STM32电机控制，根据不同的电压等级分为四级调速来进行控制-STM32 motor control, depending on the voltage level is divided into four speed to control
12864
- 12864驱动程序，可选择字体位置，设置黑底白字和白底黑字，无字库12864-12864 driver, the font setting position, black white and black and white, no font 12864
STC_EEP
- Stc EEP单字节编程 c代码 可以直接扩展到整型等变量应用-stc mcu eep
keil
- 4*4的矩阵键盘，在51单片机开发板上调试成功，返回键码值，在P0口显示-4* 4 matrix keyboard, in the development of on-board single-chip debugging of 51 successful, the return of key code values, I show that in the P0
PWM
- 利用PWM占空比调节功能，进行PB3口LED发光二极管亮度调节效果。-Regulatory function of the use of PWM duty cycle for PB3 I adjust brightness light-emitting diode LED effect.
Comm
- 利用16C554扩展串口的时序写程序、读程序 、初始化程序。-Timing using 16C554 serial port expansion write programs, reading programs, initialize the program.
LCD
- 这是一个单片机控制液晶显示的小程序。显示器上的字回循环显示。-This is a small program a microcontroller to control LCD. The word back on the monitor display cycle.
51单片机实现频率计的程序
- 51单片机实现频率计的程序，产生10个频率。不同频率的计数值：0,100,200,300,400,500,600,700,800,900HZ-The 51 MCU frequency of program
RGB_senser
- 基于单片机控制的颜色传感器巡线扫描源代码源代码.-Scan source code source code based on the microcontroller to control the color sensor line patrol.