资源列表
LABVIEWCVIAT89C51
- LABVIEWCVI和单片机AT89C51之间的程序-LABVIEWCVI and procedures between the MCU AT89C51
signal
- 基于51单片机的低频信号发生器的C语言例程-51 MCU-based low-frequency signal generator of the C language routines
LEDdisplay1
- 动态扫描，即每一时刻，只让一个数码管亮。让数码管从第一个到地第八个依次快速地显示，给人的视觉效果就是八个数码管同时显示。-Dynamic scanning
UARTMesg
- UART message of message
tiankongzhicheng
- 单片机 控制蜂鸣器 演奏天空之城 （已经过测试与实现）-The SCM control buzzer playing Laputa (has been tested and Implementation)
shumaguan
- 用定时器计时，数码管从1到100显示，希望给大家的参考-Timing, digital tube with a timer from 1-100 hope for everyone' s reference
ADC
- PIC单片机ADC模块的驱动源代码。适合于初学者学习用。熟练的工程师可以把它作为一个可以随时调用的工具，非常方便。-PIC microcontroller ADC module driver source code. Suitable for beginners to learn. Skilled engineers can use it as a tool can be invoked at any time, very convenient.
friend
- 3、 友元编写C++程序完成以下功能：（1） 定义一个Boat和Car两个类，他们都具有私用属性——重量；（2） 编写一个函数，计算两者的重量和。double TotalWeight(Boat& b, Car& c) -Friend write C++ program perform the following functions: (1) the definition of a Boat and Car two classes, they have private property- Weig
TLC5615
- 用于具有10位转换精度的TLC5615驱动，包含C文件和H文件-TLC5615 drive for has 10 conversion accuracy, contains the C files and H files
Low_Power
- 电动自行车，欠压保护程序源代码。当电池电压低于欠压保护VALUE时，减小输出，如果减小输出到一定程度时，还是低于欠压，关闭输出，并考虑电池的特性，作滞回。-Electric bicycles, under-voltage protection of source code. When the battery voltage drops below the undervoltage protection VALUE, the reduced output, if the reduced outpu
2_7
- 间隔300ms先奇数亮再偶数亮， 循环三次；一个灯上下循环三次； 两个分别从两边往中间流动三次； 再从中间往两边流动三次；8个全部闪烁3次； 关闭发光管，程序停止。-Interval of 300ms the first odd and then even bright light, cycle three times a light cycle up and down three times two separate flow from both sides to the
sds
- 实现AD767的正常工作，其中P1和P3的第四位依次是地位至高位-To achieve the normal work of AD767, in which P1 and P3, followed by the fourth position to the high