资源列表
ATs51Ctime
- 一种单片机定时器控制的八位数码管定时程序-good
clock
- 程序经典！编程控制51单片机定时器实现的电子钟功能-Procedures classic! Programming control 51 single-chip realization of the electronic clock timer function
newjs
- 0-999计数器 实现从0到999的计数，并通过数码管进行显示。-0-999
lesson5-2
- 4键控制秒表，分别实现启动，停止，置0，还有松手启动功能，清0停止运行。已通过开发板测试，能稳定运行-4 button control stopwatch, respectively, to achieve start, stop, set 0, as well as loosely-start, the Qing 0 stopped running. Development board has passed the test, be able to stable operation
s3c8274
- 三星8274初始化代码，三星8274初始化代码-Initialization code Samsung 8274
RTC
- DS1307的读写程序，调试并通过，以应用于产品中。-DS1307 to read and write procedures,commissioning and through,to apply to products
shizhong
- 通过单片机；将内部时间换算成时间的时分秒，显示在数码管上；-Through the MCU the internal time when converted into minutes and seconds time display on the digital control
xiaoche
- 小车循迹小程序，主要用激光管传感器循黑线，用于自制小车-Car tracking applet, mainly black with a line through the laser tube sensor for homemade car
ds1302
- DS1302 是美国DALLAS公司推出的一种高性能、低功耗、带RAM的实时时钟电路，它可以对年、月、日、周日、时、分、秒进行计时，具有闰年补偿功能-DS1302 is the DALLAS company introduction of a high performance, low power consumption, take the RAM real time clock circuit, it can be to year, month, day, Sunday, when, minu
xmodemCRC16.c
- 本人根据XMODEM协议的16位CRC校验方式CRC--CCITT(X^16 + X^12 + X^5 + 1)，根据其理论思路一步一步编写的源代码，按照程序思路，会比较容易理解CRC16较验方式的来龙去脉。 -I according to the XMODEM protocol 16 of the CRC method CRC- CCITT (X ^ 16+ X ^ 12+ X ^ 5+ 1), according to their theoretical ideas step by st
8051-gps-interface
- 51接口GPS的汇编程序,包括完整的主程序,以及GPS处理程序.-The 51 interface GPS assembler, including the integrity of the main program, as well as GPS handler.
mtd-erase
- 在NAND器件上进行同样操作时,通常需要驱动程序,也就...NAND 和NOR器件在进行写入和擦除操作时都需要MTD.-NAND and NOR devices are in need of MTD. in write and erase operation