资源列表
WG_26readprg
- 韦根程序,感应卡读卡器发送来的数据通过单片机读取-wiegand program
jb35s
- 三色led通过52单片机控制显示流水，跳变，渐变效果。-Led display, jump to change, gradual.
99timer
- 实现从1加到100，精度很高，以单片机为基础，是单片机学习的好程序-From a one added to the 100, high precision, single-chip microcomputer-based, is a good program to learn microcontroller
5026
- MBI5026驱动源程序，类似于74HC595,锁存下降沿-MBI5026 driver source code, similar to the 74HC595, latched on the falling edge
123
- 4、利用模块化程序编写一个字母或数制之间的转化程序，5为主模块，调用模块1和模块7 模块1又调用模块2、3、4和6四个模块，其中： 模块2实现小写字母向大写字母的转换 模块3实现大写字母向小写字母的转换 模块4实现二进制数向十六进制数的转换 模块6实现十六进制数向二进制数的转换 模块7实现十六进制数向十进制数的转换 按“q”键退出。 -4, the use of modular programming between a letter or number
mine01
- 单片机之间双向通信,在51系列单片机下实现-Two-way communication between the microcontroller in the 51 series to achieve
com
- 程序51C语言例子 串口调试实验串口调试A-Examples of serial debugging program 51C language serial debugging A experiment
FSM
- 按键的状态机实现，可以实现，短按，长按。连击等效果。-The keys of the state machine, could achieve, short press, long press. Batter and other effects.
HongWaiJiShu
- 基于STC89的红外计数器，数目必须小于65535。-Based on the STC89 infrared counter, the number must be smaller than 65535.
流水灯动态显示
- 实现流水灯的功能，一次从一到七逐步显示，程序为C语言代码-Light water, once from one to seven, the program for the C language code
DELAY
- 激光检测人流量，我们用到了串口模块，还有WT5001模块，按键控制。-Stream of laser detection, we use the serial port module, and WT5001 module, key control.
led2
- c51单片机LED灯检测程序，简单易懂的LED灯闪烁程序-c51 microcontroller LED lamp test, easy to understand LED lights flashing procedure