资源列表
fanbankongzhixitong
- 基于STC12C5A的帆板控制系统，里面把帆板的每个模块解释的很清楚。适合于新手作参考。-STC12C5A array based control system, in which each module array explained very clearly. Suitable for beginners reference.
ADC DMA
- HAL库stm32F429IGADC DMA，省事，不用再一步步移植了。(HAL library stm32F429IGADC DMA,Easy to use.)
16，ATK-S1216+GPS+北斗定位模块
- 单片机学习中能用到的学习资料，对于定位系统来说最为重要(SCM learning can use the learning materials, for the positioning system is the most important)
SDD1289
- SDD1289相关资料与驱动源码 基于STM32的驱动程序与PDF资料-SDD1289 information and driver source code driver based on the STM32 and PDF data
Nano100BSeriesBSP_V1.00.008
- Numicro M051系列开发包，超完整，格式规范，很适合蕴其它程序借鉴。KEI开发环境下编程，包括I2C,串口，GPIO,中断，定时器等，适用于所有M051系列的单片机。-Numicro M051 series development kits, ultra complete format specification, it is suitable for other applications Yun learn. KEI program under development environm
T117-design
- T117显示驱动汉彩7寸TFT屏，里面附有代码和如何制作字符表，颜色表的详细说明，所有资料都是本人编写并编译调试成功的。-T117 display driver Han-color 7-inch TFT screen, which with a code and how to make a detailed descr iption of the character table, color table, all the information I write and compile debug
SIZHOU
- 开源的四轴飞行器相关文章资料，以及开源的程序和调试工具-Four aircraft related articles open source information, as well as open-source programs and debugging tools
emWin5.22
- 基于stm32的emwin图形界面开发，可作为移植模板，实测可用-Kun ╄ paddle ti Hoan tm32 Yan eng An mwin Kun Pont Chanleibankong Mianjuanjiangfen
GD32全系列硬件开发指南
- GD32全系列硬件开发指南.............(Gd32 full series hardware development guide)
USB11_ACEX1K
- FPGA文件负责采集传感器数据，然后传给51单片机，51单片机通过usb将信号传递给上位机，，vc文件是上位机软件界面，-FPGA file is responsible for collecting sensor data, and then passed to the 51 single-chip, 51 single-chip signal transmitted to the host computer via usb vc file is a PC software interface
51_uCosII
- 根据51单片机学习uCos-II,完全可以在proteus上仿真实现,无需花钱购买系统板就可以学会uCosII.-According to 51 microcontroller uCos-II, the simulation can be implemented on proteus, no need to spend money to buy the system board can learn uCosII.
Eagle-Libraries
- Eagle library for pcb design