资源列表
2016.12.7步进电机课设3.0
- 使用keil平台与C语言编写的51单片机程序，可以控制步进电机，可控制正反转，内含proteus仿真，验证通过。(The 51 single chip computer program used by keil platform and C language can control the step motor, control positive and reverse, contain proteus simulation, and verify through.)
扫地机器人设计
- 自带小范围坐标识别，电机控制，语音控制，红外距离探测，电池充电控制，障碍识别，路径规划的功能，代码是基于单片机实现的！(It has the functions of small area coordinate recognition, motor control, voice control, infrared distance detection, battery charging control, obstacle recognition and path planning. The co
SSD1305_library
- this code is ssd1305 driver
2016.12.8电子钟课程设计
- 使用keil平台与汇编编写的51单片机程序，可以执行电子时钟功能，可修改时间与设置闹钟，内含proteus仿真，验证通过。(The 51 microcontroller program written by keil platform and assembler can execute the function of electronic clock. It can modify the time and set the alarm clock, and contains proteus sim
3_Keil_XMC1300-PWM斩波
- 运用PWM斩波方式驱动永磁电机，主要是对xmc1300中的CCU8模块进行了设置。(The PWM chopper mode is used to drive the permanent magnet motor, which is mainly used to set the CCU8 module in xmc1300.)
自行车里程表的设计
- 基于单片机的自行车里程表 里面有详细的C程序(There are detailed C programs in the bicycle odometer based on single chip microcomputer)
一个水厂综合自动化系统的S7-300程序
- step7 300程序水处理，一个水厂综合自动化系统的S7-300程序(STEP7 300 program water treatment)
xp.chaojizhongduan
- 恢复和盛大开放和盛大卡回复会计师大富科技是的哈付款就好撒地方看电视看见sdkj(kjdhfdjksfh jkadshf kjasdlhf lasdkhf lkjsdah ljkds)
bootloader-2017-9-26-old
- 该工程是基于LPC1857单片机开发的数控程序，包含了SDRAM、EMMC驱动代码，还在单片机上移植了UCOSIII系统，并在此基础上移植了FATFS文件系统、LWIP1.4.1网络协议栈。该工程是实际项目中的源码，稳定性绝对有保障，供大家参考。(The project is based on LPC1857 microcontroller development of CNC program, including SDRAM and EMMC driver code, and also tra
buffer
- iot test base 64 for working hander
74HC595 for stm32
- 使用STM32编写程序控制移位寄存器，进行控制led循环亮灭(Using STM32 to write program control shift register to control the LED cycle)
流水灯
- 51单片机实验实现四种流水灯形式变换的程序编程(Program programming of 51 single-chip microcomputer experiment to realize the transformation of four kinds of flow lamp)