资源列表
Desktop
- rc663程序源码，SPI通信协议的，c语言开发(Rc663 program source code)
实验1 跑马灯实验
- led的切换功能,stm32最简单的实验(The handoff function of LED, the simplest experiment of stm32)
sensor_LIS3DH_driver
- 加速度传感器 LIS3DH 的驱动参考代码(acceleration sensor LIS3DH driver code)
W25Q256四字节读写程序
- W25Q256四字节读写程序实例，非常实用(W25Q256 four byte read and write program instance)
Acr122U-IC
- 采用NXP出品的高集成度PN532读写芯片， 符合ISO/IEC18092（NFC）标准，兼容ISO14443（Type A、Type B）标准。采用USB接口与电脑进行通讯及供电，不但可以读取符合Mifare标准的Classics（M1、M4、MUL）和DESFire卡，还支持FeliCa卡等符合NFC规范的非接触式IC卡。(IC card and entrance guard card reading and writing)
MyScomTest可实时显示数据
- 基于Matlab的串口实时接收数据。并显示(The data is received in real time based on the serial port of Matlab. And display)
8. LCD1602-移入显示
- 液晶的移入显示实现，利用Proteus仿真，Keil编程。(The liquid crystal is moved into the display, using Proteus simulation and Keil programming.)
6. SC-printf
- 单片机串口通讯协议的实现，使用printf输出到电脑(The realization of the serial communication protocol of single chip microcomputer, using printf to output to the computer)
9、CC2530 串口UART0发送字符串
- cc2530 uart模式 串口发送数据给cc2530 ，发送一次led闪烁一次(cc2530 uart send char.The led light when cc2530 received data from uart.)
hongwai
- 红外通信模块进行通信，用遥控按下按键，数码管显示按键的值(The infrared communication module communicates, uses the remote control to press the key, the digital tube displays the keystroke value)
1302shizhong
- 用ds1302外部时钟做的电子时钟，用八位数码管显示，能显示时间和日期(An electronic clock made with an ds1302 external clock, displayed with an eight-digit digital tube, capable of displaying time and date.)
chuankou
- 使用IIC总线实现串口通信，单片机接受到信息后再将信息发送出去(Using IIC bus to realize serial communication, the single chip computer receives the information and sends it out.)