资源列表
code
- 基于ARDUINO平台将超声波采集的模拟信号转换成数字信息，然后利用串口通讯将数据（8位二进制）传送至PC端，利用相应的程序进行处理即可，本程序经调试已成功使用。-Arduino based development platform, analog data acquisition ultrasonic sensor converts the digital signal, and then sends the data through the serial port to the Pc sec
msp430-MPU6050-DMP
- msp430的MPU6050-DMP官方例程-msp430 of MPU6050-DMP official routines
AD10_LCD12864
- msp430g2553单片机AD转换后用液晶显示-After msp430g2553 with AD conversion is displayed on the LCD LCD12864.
FUZAI
- 根据 stm32 进行编译的直流电子负载的程序 可用 利用矩阵键盘进行设置 5110进行显示 有恒流恒阻恒功率三种模式可调-According to the STM32 compiled DC electronic load program available using matrix keyboard to set 5110 display adjustable constant resistance and constant power three modes of constant cur
da-dac714
- 基于MSP430的DAC714 电压转换程序-MSP430 based on the DAC714 conversion process
ProtoThreads
- arduino多线程库，可以实现多任务多线程，并发处理，占用空间小，性能强大-arduino multithreading library, you can multi-task multi-threaded, concurrent processing, small footprint, powerful performance
SoftwareSerial
- arduino软串口实现，可以实现将任意io针脚，定义为串口-arduino soft serial port, you can achieve any io pins, defined as serial
ADC
- 1路AD单次采集(采用串口调试助手显示) 用串口调试助手向单片机发送AD命令,单片机 接收到命令后将读取ADC0的电压值返回给计算 机在串口调试助手上显示.-1 channel AD single acquisition (using serial debugging assistant display) AD send commands to the microcontroller using serial debugging assistant, SCM After
MSP430F14IPC-2014
- 本程序是MSP430F149单片机下的LCD12864、AD采样及PWM结合的综合应用-This program is under the MSP430F149 MCU LCD12864, AD sampling and PWM combined with comprehensive application
STM32L_ModeCode
- STM32L151(ADC+USB).Very short lightning impulse measuring.
DS1722
- 基于msp430和DS1722的温度检测，通过三线接口连接，DI和DO连在一起作为IO，SERMODE接地使用三线接口模式。-Temperature detector based on MSP430 and DS1722 , connected by three wire interface, DI and DO tie together as IO, SERMODE connect to ground using three wire interface mode.
STM32-AD-TIM
- 基于STM32单片机的TIM2定时器触发AD转换，控制AD的转换速率，弥补DMA传输速度过快导致数据处理混乱的问题。-Trigger AD conversion is based STM32 microcontroller TIM2 timer controls the AD conversion rate to make up for excessive speed DMA transfer of data processing leads to confusion problems.