资源列表
AVR_M16_JTAG
- 仿真电路，代码。可以自己直接动手做一个JTAG仿真器。-Circuit simulation code. Can direct their own hands to make a JTAG emulator.
qpc_4.0.04
- Lightweight, open source, state machine framework for embedded systems
AN_QP_and_Cortex-M3
- Lightweight, open source, state machine framework for embedded systems
szqdq
- 数字抢答器由主体电路与扩展电路组成。优先编码电路、锁存器、译码电路将参赛队的输入信号在显示器上输出；用控制电路和主持人开关启动报警电路，以上两部分组成主体电路。通过定时电路和译码电路将秒脉冲产生的信号在显示器上输出实现计时功能，构成扩展电路。经过布线、焊接、调试等工作后数字抢答器成形。-Answer the number of circuits is controlled by the main circuit and expansion. Priority encoder circuit, l
wirelessTX
- 摩托罗拉dg128 智能汽车开发源码！适合mc9s12dg128-Motorola smart vehicle development dg128 source! For mc9s12dg128
image_sensor
- Sensor驱动代码 OV7680 的 是我们做的尝试 双摄象头 不过容易出现一些小问题 要做稳定需要好好调试-one sensor driver based on MTK 6225 platform :#define OV7670 #ifndef HW_SCCB void SCCB_send_byte(kal_uint8 send_byte) { volatile signed char i volatile kal_uint32 j fo
Introduction_to_LabVIEW_8_in_3_Hours
- THIS FILE REGADING TO LEARN LABVIEW AND EASY UNDERSTAND OPERATION
PlayMusic
- 本代码已经在proteus和keil2中联机仿真调试通过,可以播放小音乐片段.-The code has been proteus-line simulation and debugging in keil2 passed, can play music clips.
hurricanelamp
- 本代码主要实现了LED灯的流水显示,并且已经实现了在keil2和proteus中的联合调试.-The main source of water of the LED light show, and has achieved keil2 and proteus in the joint debugging.
SimulateSerialOutput
- 本代码实现了对串口输出的仿真,并且已经在keil和proteus中联合调试成功.-The serial code of the simulation output, and has in keil and proteus in the success of joint commissioning.
StaticLED_Key
- 本代码实现了对LED与按键对应的仿真,并且已经在keil和proteus中联合调试成功.-Of the code button on the LED with the corresponding simulation, and have been in keil and proteus in the success of joint commissioning.
Xilinx_JTAG
- Xilinx JTAG LPT version, Eagle 5.6.0 schematic and board (pcb) included in addition to PDF files. 5k1 resistor can be replaced with 1k and 100ohm resistors can be replaced with 110ohm. Tested - works perfectly with Xilinx iMPACT 11.-Xilinx JTAG LPT v