资源列表
ArduinoPPHP
- Arduino with php source code to control as webserver
a-frequency-meter-program
- 用汇编编写的一个频率计程序可以运行在51内核的单片机上，开发环境为keil c-Compilation prepared by a frequency meter program can run on 51 core microcontroller development environment for keil c
ucGUI
- 基于stm32F103的ucGUI移植实验-The ucGUI transplantation experiments based stm32F103
STM32-character-copy
- 基于STM32F103的字库拷贝功能的函数-Based on the character copy STM32F103
STM32-DS18B20
- 基于STM32F103的时钟芯片DS18B20的使用-The clock chip DS18B20 based STM32F103 use
DHT11P51PC-CODE
- DHT111数字温湿度传感器,51单片机控制，KEIL工程，C语言代码，LCD1602液晶显示。 -DHT111 51 c program
LUT_C
- 查找表（Look-Up-Table)简称为LUT，LUT本质上就是一个RAM。它把数据事先写入RAM后，每当输入一个信号就等于输入一个地址进行查表，找出地址对应的内容，然后输出。本程序是LUT的C语言实现。-Lookup Table (Look-Up-Table) referred to as LUT, LUT is essentially a RAM. After which the data prior written RAM, whenever the input signal is eq
Int2String
- transform an Inter in a String
Array_und_Pointer
- Array and Pointer examples
23led-1
- 数位时速表，单片机+74254组合20个七节显示器，传输接口RS485-Digital speedometer, a combination of 20 single-chip+74254 seven sections display, transmission interface RS485
wxymatlab
- matble编程实现fir滤波器,采用c编程，已通过测试。-Matble filter by programming.
ml507_mb_standalone_apps_bit_elf_ace
- xilinx的ml507开发板系统bootloader程序及其操作说明可以下载到CF卡中运行-The ml507 xilinx development board system bootloader program and its instructions can be downloaded to the CF card to run.