资源列表
da
- STM32 6路PWM输出 带上位机 模拟电压输出，控制电机转速-STM32 PWM
Gcode_interpreter
- STM32 二维滑台控制 G代码解释 激光雕刻机 -STM32 Gcode_interpreter
RF-carrier-testing-program
- nrf51822射频载波测试程序，通过led发射载波信号。-nrf51822Radio frequency carrier testing procedures, through the LED transmit carrier signal.
5529_LAB1
- 基于MSP430F5529的简单的时钟代码，同时可以完成对比度调节等功能。-Based on MSP430F5529 simple clock code, and can complete contrast adjustment and other functions.
Oscilloscope
- 野火开发板示波器模块程序，学习STM32资料必备！-Wild fire development board oscilloscope program, learning STM32 data essential!
DZ60-iic-and-serial-drive-code
- 利用C语言，在DZ60单片机上实现串口和IIC驱动程序 -it relizes IIC drive and serial drive ,using c language ,in DZ60 sigle chio
TIMPDACPDMA
- 基于STM32为单片机的TIM+DAC+DMA输出任意波形的信号发生器。可产生不同的波形，并且产生不同的频率和不同的幅值，是新手入门信号时发生器的首选。-Based on the STM32 MCU TIM+ DAC+ DMA output arbitrary waveform signal generator.Can produce different waveform, and produce different frequency and different amplitude, is t
AC-MOTOR-SVPWM-VF
- SVPWM正弦波方式驱动交流电机，该方式驱动电机噪音低，转速稳定-SVPWM sine wave way ac drive motor, the way to drive motor noise is low, speed stability
ILI9163.c
- ILI9163 intrfacing Parallel ,LCD: 128 x RGB x 160 dots
FreeRTOS
- FreeRTOS中文实用教程,资料一般，建议还是查看原英文文档，次文档只做参考-FreeRTOS practical guide, information is general, it is recommended to see the original English document, the document only reference
GUI
- 单片机uart上位机程序，通过matlab编写，显示波形及16进制转换-Microcontroller uart PC program, prepared by matlab waveform display and hex conversion
AT89S51PADC0809
- AT89S51+ADC0809电压测量显示程序(Keil uVision3+Proteus 7.8仿真通过)-AT89S51+ADC0809(Keil uVision3+Proteus 7.8