资源列表
work3
- 实测一组机械系统的振动信号，记录采样频率、采样点数，估计该组振动信号的均值、均方值、方差、自相关函数和功率谱，其中功率谱估计对比频率平滑与分段平滑的效率，针对分段平滑、分析不同平滑次数对功率谱估计的影响-Found a mechanical vibration signal system, the recording sampling frequency, sampling points, the estimated mean the set of vibration signals mean
EVcharge
- 考虑电动汽车的出行需求以及电网的波动特性，建立了电动汽车参与削峰填谷的控制策略-Travel demand and the volatility characteristics of the grid to consider electric vehicles, electric vehicles involved in the establishment of a load shifting control strategy
blasingame_method
- 圆形封闭垂直裂缝井无限导流垂直裂缝模型blasingame方法-Circular vertical fractured well closed infinite diversion vertical fractures model blasingame method
klacorrfficent
- 求两个时间序列的相关系数，KL散度。可以比较时间序列之间的相关性-KL divergence && correlation coefficent
在matlab中读取spe文件
- 这个代码可以用来在MATLAB中读取SPE文件。SPE是普林斯顿仪器专用的文件格式
PMSM_MTPA_FLUXWEAKEN
- PMSM电机的MTPA基本弱磁控制仿真，需要自己设置电机参数、模块中的部分参数也要设置才能进行仿真。-MTPA fundamental weakening control PMSM motor simulation, you need to set the motor parameters themselves, the module also set some parameters can be simulated.
BPSK_QPSK_Carrier_Recovery_C
- BPSK/QPSK调制载波同步源代码，采用科斯塔斯（COSTAS）环算法，经过验证，稳定可靠。-BPSK/QPSK modulated carrier synchronization source code, using the Kostas (COSTAS) ring algorithm, after verification, stable and reliable.
deconvolution
- 采用FIR最小二乘逆滤波器来实现反卷积 1.通过输入信号xn与传递函数gn求输出yn 2.通过使平方误差达到最小求出最佳延迟 3通过最佳延迟求得逆滤波器传递函数hn 4通过hn与yn进行卷积运算得到还原的输入信号xn1，进行对比 5按照题设要求，进行相关噪声添加，再次进行上述实验过程 -Using least squares FIR inverse filter to achieve deconvolution
J2Prop
- 二体问题条件下，带有J2摄动的ECI状态量传播预测，-Propagate an ECI state into the future with the J2 perturbation.
PPC---step--3k3
- 同步电机电流预测控制，建立电机模型，通过编写函数实现电流的预测控制-predictive current control of PMSM
spline
- 通过B-样条曲线将仅由三维空间中若干点构成的折线轨迹平滑成曲线轨迹，并可视化。可用于机械臂的运动控制规划。-Through the B- spline curve, the curve of the broken line formed by several points in the 3D space is smooth, and can be visualized. Motion control planning for a robot arm.
tic2000demos
- matlab ti2000系列DSP基于模型设计的例程，simlink+ccs+硬件直接可以生成C语言代码，在硬件中可以直接运行。-matlab ti2000 series DSP can generate C code model-based design routines, simulink+ ccs+ hardware, you can run directly in hardware.