搜索资源列表
liyao_ucos1
- 由Jean Labrosse先生写的uC/OS的实时操作系统核心的C源代码以及说明。这是Jean先生为68HC11系列写的RTOS，但是随着越来越多的MCU的出现，Jean把他的RTOS移植到许多平台上，比较适合扩展模式的应用模式，如XA，X86，但是一些客户不知道如何使用，实在糟蹋了！不过提醒各位，这仅仅是一个核心模块，嵌入应用环境太多了，许多其他模块象：文件模块，通讯模块，显示模块等，都需要大家自己努力了！那我自己也在尝试增加一些模块，象TCP/IP协议，可以为许多应用提供附加应用。-by
tempra
- 功能：实现对DS18B20的读取 原理：单总线协议 注意：单总线协议对延时要求比较严格，此程序中采用的是11.0592M的晶振，如果使用其他的晶振请跟据DS18B20的资料修改延时参数 版本：1.4b -functions : to achieve DS18B20 read Principle : single-bus protocol attention : single-bus protocol to delay requirements more strin
pcausa
- 这是一个基于NDIS通信协议而编写的Win32应用程序的接口函数，Win32 用户可以不用关心底层驱动的行为，而直接编写应用程序-This is a communication protocol based on NDIS prepared by the Win32 application program interface function Win32 users do not have to be concerned about the bottom-driven, and direct t
tcpip_stack_full
- 完整的整合了TCP/IP协议栈里所有的协议，并包含有完整的应用层HTTP、FTP、TELNET、SMTP等等协议，可以直接应用！-complete the integration of TCP / IP protocol stack, all the agreements, and includes a complete application layer HTTP, FTP, TELNET, and SMTP, and so on the agreement, can be directly
AVRNET(ENC28J60+ATMEAG32)from_icdev[1].com.cn
- avr+enjc28j60,tcpip协议栈，已经经过实验-avr enjc28j60, tcpip protocol stack already experiment
PCIgenericdriver
- This a generic PCI express device driver that enable user to access the device without caring much of the PCI express protocol in user mode. An utility program was built to help user in developing the application based on the given skeleton.
blaster
- Blaster is a simple application that illustrates Windows NT 5.0’s support of the IrDA protocol. IrDA provides reliable point to point connectivity between 2 computers equipped with infrared -Blaster is a simple application that illustrates Windows NT
virtualSever.rar
- 在Windows2K操作系统上虚拟出若干串口设备，这些虚拟串口设备作为 TDI Client 将串口应用程序（比如超级终端）读写串口设备的操作通过网络的方式传递到远端，即将应用程序写入的数据以UDP协议发送到远端目标机器的指定端口；监听本机指定端口，将所有在此端口收到的UDP报文数据提交给应用程序。,At the operating system on virtual Windows2K a number of serial devices, such as a virtual serial p
NDIS_driver.rar
- NDIS协议驱动开发，请参考DDK里面的packet代码阅读本文,NDIS protocol driver development, please refer to the packet code inside DDK read this article
PassthruInstall
- 自动安装NDIS中间层驱动 passthru的程序，稍作修改也可用来安装NDIS 协议驱动-Automatically install the NDIS intermediate driver passthru procedures, with slight modifications can also be used to install NDIS protocol driver
vxdtdi
- 访问TCP/IP协议栈的vxd例子 -The vxd example for visiting tcp/ip protocol stack
NDIS_Monitor
- DIS Monitor allows to catch and log the exchange of packet data between NDIS miniport drivers and network protocol modules that occurs in kernel space. (exe by C# and Driver by c/c++ )
2009032610415400001
- 组态王 高版本 驱动开发 内含实例及教程 适合于初级用户定义自己的通讯协议，便于实现组态王驱动程序-KingView high version of the driver development includes examples and tutorials for the primary users define their own communication protocol is easy to realize Kingview Driver
zlIP_51_proteus
- 这是南开版TCPIP协议栈驱动程序zlIP_51_proteus-This is version Nankai TCPIP protocol stack driver
TDMA
- 采用OPNET多址协议的仿真 比较有实用参考价值-Multiple access protocol using OPNET simulation have more practical reference value for
CCP-Driver
- Vector公司提供的CCP协议(CAN Calibration Protocol)的ECU驱动。-CAN Calibration Protocol is used in auto indust. especially for ecu software.
NDIS-protocol-driver-develop
- 详细讲解了Windows环境下的NDIS协议层驱动的编写过程,并以一个例子来进行讲解,很详细实用-Explained in detail under the Windows environment, the preparation of NDIS protocol layer driven process, and an example to explain, it is more practical
hid-over-i2c-protocol-spec-v1-0
- hid-over-i2c-protocol windows 驱动开发-hid-over-i2c-protocol windows driver development
NDIS-Protocol-Driver-Sample
- NDIS协议驱动DEMO-NDIS Connection-less Protocol Driver Sample
RS485-communication-protocol
- RS485通讯协议 适合于主从通讯 多个子单元的控制，对此控制过程从实例做了详细描述-RS485 communication protocol suitable for master-slave communication