搜索资源列表
u-boot-1.0.0.tar
- U-BOOT主要用于LINUX系统的初始化及系统引导-U-BOOT mainly for the Linux system initialization and boot
jjj-start_kernel
- (系统初始化start_kernel函数） -(start_kernel system initialization function)
R61503B
- R61503B 屏IC的初始化代码，应用于各种多任务系统-R61503B screen IC initialization code, applied to multi-task system
init
- linux 得初始化。-initialization.
u-boot.rar
- 详细描述了arm开发板的启动过程，以及初始化所做的事。,A detailed descr iption of the arm plate to start the process of development, as well as the initialization done.
sendrecv1.tar.gz
- Arm Linux 下3G模块初始化程序 for TD LC6311,Arm Linux initialization procedure under the 3G module for TD LC6311
linux
- 包括初始化、进程管理、进程通信、内存管理、设备管理、中断、文件系统、系统调用等精选源码分析。-Including initialization, process management, process communications, memory management, device management, interrupt, file system, system calls, such as analysis of selected source.
clock
- s3c6410的时钟初始化代码，这是裸板代码，所以主要是配置寄存器-s3c6410 clock initialization code, which is bare board code, so the main configuration register
i.MX27K9F1G08
- i.MX27+K9F1G08的初始化，nandid检测、烧录-i.MX27+ K9F1G08 initialization, nandid testing, burn
jtagtools-bfin-0.3
- 本源码支持blackfin系列DSP的jtag协议转换，支持linux下访问blackfin系列DSP的jtag链，读取和写入边界控制信号，是处理器初始化写入flash代码的必备程序-This source to support the Blackfin DSP series of JTAG protocol conversion, support for linux to access the JTAG Blackfin DSP series chain, read and write the
sc-0.3.0.tar
- linux下的专门用于处理PKCS11的c++库和源代码 非常好用，直接初始化调用，参照。 -under linux dedicated to deal with PKCS11 the c++ libraries and source code very easy to use, direct initialization call, in the light.
main
- 串口应用程序，串口初始化，波特率，校验位的设置等。-Serial applications, the serial initialization, baud rate, parity bit and other settings.
2410
- 针对2410开发板，嵌入式系统目标板硬件初始化入门代码-For the 2410 development board, embedded system target board hardware initialization entry-code
uart0
- 这是一个Linux下使用的串口通信代码，有详细的注释，可根据自己需要修改，初始化是可以沿用的标准框架-This is a Linux use of serial communication, have commented code, can according to their own needs modifying, initialization can be used for standard frame
cpu_init
- 2440 NAND FLASH初始化驱动代码，具体请参考代码内容-2440 NAND FLASH driver initialization code, please refer to code the content of specific
varArr
- 自己写的例程，模拟USB初始化时枚举设备时动态数组的使用过程。只实现了其中的APPEND部分。其中SIZE为零的数组是其特点。-Write my own routine, simulation enumerate USB device initialization process of using the dynamic arrays. only part of APPEND. which is characterized by an array of zero size.
9
- 在 μC/OS-II 上的移植，主要是针对与 CPU 或编译器相关的文件和操作系统模拟层来 进行移植，并简要描述了 LwIP 对下层的网络接口和上层的应用程序接口的编程模 型。针对以太网控制器和网络物理层芯片的硬件特征，实现了以太网驱动程序，主 要完成以太网的初始化、中断处理以及数据的接收和发送等功能，为 LwIP 提供驱动 支持。根据嵌入式应用开发的需要，在 LwIP 协议栈的基础上实现了 TFTP 协议以及 网络烧写服务器，为 Bootloader 提供有实用性的网络下载
33753123com_LCD_test
- lcd显示 S3C2410平台下的LCD固件程序，实现LCD初始化和显示功能。能够显示简单图形、ASCII字符、汉字字符和彩色位图。-lcd。-S3C2410 platform LCD firmware procedures, initialization and realize LCD display. Can display simple graphics, ASCII characters, Chinese characters and color bitmap
vote.tar
- 电子投票系统，基于Linux的c代码，实现管理员及候选人、普通用户的初始化及管理。实现了对候选人的电子投票业务。-Electronic voting system, based on Linux, c code, administrators and candidates to achieve the average user initialization and management. Implement electronic voting for the candidate business
ioctl
- IOCTL初始化，linux底层文件，为头文件-IOCTL initialization, linux underlying documents, the header file