搜索资源列表
justforfun
- srand[getpid[]] /* initialize some of the memory */ memset[heightmap, 0, MAPSIZE*MAPSIZE] memset[vpage, 0, RENDERWIDTH * RENDERHEIGHT] printf["Creating dx d fractal terrain\n", MAPSIZE, MAPSIZE] heightmap[0] = [rand[] 128] +
yacc
- srand[getpid[]] /* initialize some of the memory */ memset[heightmap, 0, MAPSIZE*MAPSIZE] memset[vpage, 0, RENDERWIDTH * RENDERHEIGHT] printf["Creating dx d fractal terrain\n", MAPSIZE, MAPSIZE] heightmap[0] = [rand[] 128] +
DP_RAM_lab
- 用SmartGen 生成一个2k*8 Dual Port RAM，并通过串口发送数据初始化RAM。然后通过串口返回到上位机的串口调试程序显示。-SmartGen generated using a 2k* 8 Dual Port RAM, and sending data through the serial port to initialize RAM. And back through the serial port to the PC serial port debugger displ
qudong
- 嵌入式系统基本驱动，对硬件寄存器进行初始化还有给设备分配I/O，申请DMA通道等-Embedded systems the basic drive, to initialize the hardware registers are allocated to the device I/O, applications such as DMA channels
GlVideoManager
- VideoMan (Video Manager) is an open-source C++ library that helps you developing video based applications. We created VideoMan to increase our productivity developing computer vision applications, but it can be used in many other ways. With Vid
u-boot-1.3.1.tar
- uboot 源码，版本 1.3.1This directory contains the source code for U-Boot, a boot loader for Embedded boards based on PowerPC, ARM, MIPS and several other processors, which can be installed in a boot ROM and used to initialize and test the hardware o
s3c-u-boot-1.1.6_rel-4-3-1_20080811.bz2
- This directory contains the source code for U-Boot, a boot loader for Embedded boards based on PowerPC, ARM, MIPS and several other processors, which can be installed in a boot ROM and used to initialize and test the hardware or to download and
xllp_lcd
- // Initialize the GPIO registers for proper LCD Controller operation LCDSetupGPIOs(pXllpLCD) // Initialize the LCD Controller and frame descr iptors LCDInitController(pXllpLCD) // Clear LCD Controller status register LCDClearS
tw9910
- tw9910.c initialize and control code
YL3250_kickstart
- kickstart首先做必要的系统初始化，然后将自身代码搬移到IRAM末尾的32K处，搬移大小为0x4000（16K）。之后初始化GPIO并加载stage 1 app到IRAM的首地址处（0x0），并跳转到此处执行。-The kickstart First make the necessary system initialization, its own code and then will move to the end of the 32K at the IRAM move size is
YL3250_s1l
- Stage 1 app开始执行，首先作系统初始化（汇编语言写）；然后做stage 1 app相关初始化，包括获取配置参数、初始化中断和串口、初始化LCD和显示logo，初始化stage 1 app命令等；然后进入stage 1 app命令行或者自动加uboot。-Stage 1 the app is started, the first for the system initialization (assembly language) and then do the stage 1 the a
hctosys
- RTC subsystem, initialize system time on startup.
ima_policy
- initialize default measure policy rules
initialize
- initialize a filesystem handle given superblock parameters for Linux.
InitializeThreading
- Initialize Threading for Linux QT GUI.
hmac_init
- HMAC support, initialize state for linux Device Driver.
initialize
- initialize a filesystem handle given superblock parameters. Used by mke2fs when initializing a filesystem.
LVPSA_QPD_Init
- Initialize a quasi peak filter instance.
codemarker
- When a code marker constructs itself, it puts itself into the static list of code markers. All the code markers in the static list get initialized in initialize(), which is not called until after the qdoc configuration file has been read for Linux.
pelican
- Pelican MAC, initialize state