搜索资源列表
armboot-1.1.0
- arm的bootloader启动代码，版本为1.1.0，可以在此基础上进行修改即可-arm of the bootloader startup code, version 1.1.0 can be modified on this basis can
mkxxxximage_tools
- 针对性的更新了之前的mkxxxximage_tools，下载后需要将rar修改为tar.bz2-Targeted updated before mkxxxximage_tools, and need to download rar modified as tar.bz2
1-LEACH-Makefile-modified
- leach make file... modified for wireless sensor network utilization.
rt5572-modified
- Ralink RT557x RT53xx RT30xx 驱动（修复ATERE2P ATELDE2P功能）-Add a command iwpriv ra0 set ATERE2P = 1 to display all EEPROM content. Correct the limitation of the length of fragment.Add WPS PBC Session Overlap Detecting.
UART2
- 开发环境Ubuntu10.10 内核源代码版本linux2.6.32.2 交叉编译环境版本V4.4.3 驱动函数说明： 该代码是S3C2440的UART2口驱动。半双工通讯，可在加载代码时修改波特率。 本代码项目实用，可参考。-Development environment Ubuntu10.10 Kernel source code version linux2.6.32.2 Cross-compiler environment version V4.4.3
board-edosk7705
- Modified for edosk7705 development driver for Linux.
leds
- AM335X-EVB下采用GPIO驱动LED的程序，可根据需要进行修改。-AM335X-EVB GPIO driver LED program can be modified as needed.
dm9dev9000c
- 韦东山视频中的网卡驱动程序，已经修改好的，适合在JZ2440板子上使用-Wei Dongshan video card driver has been modified to a good, suitable for use on board the JZ2440
aardvark_I2C
- Modified I2C API to read and write memories
dm365-adc-linux_drive
- DM365 内部ADC liunx驱动。本驱动使用DM365evm裸机ADC测试程序修改而来，只有原默认ADC配置。实现功能也相对简单，app可以使用read()函数一次读取6个通道的转换值。您可以在此驱动基础上稍作修改，实现app配置ADC功能。-DM365 internal ADC liunx drive. The driver uses DM365evm ADC testing procedures modified from bare metal, only the original d
iscsitarget_1.4.20.3Psvn496.orig.tar
- iscsi免费服务端，linux版本，iscsitarget，对传送模块做了修改,可以实现无线网之间的传送-Free iSCSI server, Linux version, iscsitarget, to transfer module has been modified, can realize the transmission of wireless network.
zhlyb_v3.2
- 欢迎使用中环留言版V3.2版。。。 修正了IIS各别IIS无法留言问题，还有一些小小问题，该版本如果没其他大问题将不再作修改。。 首次安装 V3版将采用的是UTF-8格式，前面两个版本都是gb2312。 使用本留言版前提是您的数据库必须支持MYSQLI，关于怎么开启MYSQLI扩展请到百度搜. 请将留言版放到你的WWW目录，然后运行http://你的域名/index.php 将会进入安装。 后台登陆地址:http
STM32F4xx_StdPeriph_Templates
- dsp解壓縮 IAR版本 I have written a simple program for the STM32F4 Discovery board that plays a short mp3 file flash memory. For the decoding, the fixed point version of the Helix mp3 decoder is used. The audio output driver is the one used for the Per
dm9000
- mini2440开发板dm9000网卡驱动，采用micro2440机器码。，如用其它型号可修改机器码和时钟-mini2440 development board NIC driver dm9000 using micro2440 NIC driver modifications for mini2440, as with other models can be modified machine code and clock
skeleton_bigurb_thread
- 本文件是CY68013在linux下的驱动程序，基于USB框架进行修改，在利用USB 2.0接口的情况下实现24MB/S的速度-This document is CY68013 under linux drivers, to be modified USB-based framework to achieve the speed of 24MB/S in the case of using USB 2.0 interface
FIMG_3D_source
- 三星的arm芯片的g3d功能的源代码和数据手册，方便对g3d功能的开发，可用作参考代码进行修改使用。-Samsung ARM chip g3d function source code and data handbook to facilitate the development of g3d function, can be used as reference code was modified to use.
atmel_lcdfb_driver_for_linux
- linux驱动lcd液晶屏幕的驱动程序，lcd液晶驱动， AT91sam9263板子液晶屏驱动的详细步骤和方法，我的屏幕是640x480，牌子三菱。用的atmel的arm9驱动lcd display；修改linux内核源码linux内核驱动源码； 换屏幕需要修改3个文件，lcd驱动如何编写，如何修改lcd驱动，linux液晶驱动，linux frame buffer驱动 /////////////////////////////////////////////////////// 一
S3C2440_20160913_1.5.204_r3919.tar
- QQ物联，基于2440修改的，能成功运行 ,添加了摄像探头的操作驱动。-QQ things together, based on the modified 2440 can be run successfully
Bootloader
- By replacing the stock loader with modified Redboot we can install OpenWrt permanently. Replacing the loader is tricky because you need to get a version tailored for your device (correct hw. revision and flash type) - see in the forum and below! Here
system
- 构成一个Linux系统所需的bootlader（u-boot)、内核及busybox等程序被放在这 个目录下。 里面有原始的源码及补丁，这些补丁是对这些代码所做的全部修改的集合。可以按照书中步骤逐渐修改，也可以直接使用这些补丁。可以利用这个目录下的源码构造出一个最小的Linux系统。-Constitute a Linux system required bootlader (u- boot), the kernel and the busybox is placed on this