搜索资源列表
USB技术方案
- 众志-863系统芯片 USBDC（univer serial bus devce control通用串行总线设备控制芯片，以下简称USBDC）是和带有USB主机控制器的设备进行通信的支持部件，实现和带有USB主机控制器的设备进行数据交换。 USBDC和APB连接进行寄存器的初始化配置，和DMAC连接进行大量的数据交换。-USBDC system-on-chip (Univer serial bus control devce Universal Serial Bus device control
mdb
- 一种用于 MDB 介面的主机通讯程序. MDB 是一种国际标准的自动售货机内部通讯协议-MDB interface for a host of communications procedures. MDB is an international standard internal-vending machine -- Agreement
cktx1
- 将程序编译通过，写入芯片，插入实验板，用通读电缆将实验板与主机的串口相连就可以实验了。上面的程序功能很简单，就是每隔一段时间向主机轮流送数55H和AAH，并把主机送去的数送到P1口。-procedures to compile and write chip, insert experimental boards, reading the cable will be used experimental plate and serial port connected to the mainframe
ChangeBright_ScreenBySer
- 一个可以通过串口读取传感器的亮度信息,然后发送数据到主机中,根据这个值可以来设置我们显示屏的亮度-through a serial sensor to read the brightness information, and then sent the data to the host. According to this value can be set up to monitor the brightness we
ez320
- The EZ320 utility demonstrates the communication program between host PC and the MR320.
VC-rs232.VC串口控制加摄像头视频适合机器人上位机
- VC串口控制加摄像头视频适合机器人上位机,只要适当改变active控件属性,就可以适应不同串口,很适合做机器人的上位机编程入门.,VC video camera plus serial control for robot host computer, as long as appropriate to change the active control properties, you can adapt to different serial port, it is suitable for r
ch375b.USB串口通信的源程序
- USB串口通信的源程序，使用芯片CH375的主机方式和从机方式,USB serial communication source, use the chips CH375 host mode and slave mode
Delphi数据采集与串口通信测控应用实战
- Delphi数据采集与串口通信测控应用实战，利用Delphi编写各种串口通信检测的上位机。-Delphi data acquisition and serial communication monitoring and control application of combat, the host computer using Delphi to write the detection of a variety of serial communication.
FPGArs232.rar
- FPGA中实现rs232串口通信程序，上位机和FPGA互发数据,FPGA to achieve rs232 serial communication procedures, each host computer and FPGA-fat data
STC51-MCUs-communication
- 本程序实现了基于51单片机的多机串行通讯：通过主机对从机操作读取获得挂于从机的温度传感器DS18B20温度值显示于主机控制的液晶屏。-This program implements the serial communication based on 51 single-chip multi-machine: by the host to read from the operating temperature sensor DS18B20 temperature hanging slave T
OMRON_PLC_Control.rar
- 欧姆龙PLC RS232 通讯 hostlink应用例子 源码 VC++开发 可用于学习编写OMRON_PLC上位机控制软件,Omron PLC RS232 communications applications hostlink example of VC++ source code can be used to study the preparation of the development of PC control software OMRON_PLC
Ad7708atmega128uart
- Atmega128 操作模数转换芯片AD7708，并送串口给上位机的详细完整代码，开发环境是Winavr2008.-Atmega128 operating a/D conversion chip AD7708, and sent to the serial port to the host computer of the detailed code, development environment is Winavr2008.
prodave5.6
- 开发S7-300/400与第三方软件串口通讯软件！对自行开发上位机工控软件者是非常难得的好资料！网上很难找的！万勿错过！-Development S7-300/400 with third-party software serial communication software! Pairs of self-developed Host Computer Control Software It is very rare good information! Very difficult to fi
UARTInt
- LPC1700系列串口中断接收程序，中断方式接收上位机数据并将接收的数据回送给上位机，借助串口调试软件，并设置波特率为9600，8位数据位，1位停止位，注意不要选中"HEX显示"。-LPC1700 series serial interrupt receiving program, to interrupt PC to receive data and receive data back to the host computer, with the serial debugging softwa
FPGA-RS232-verilog
- fpga上的串口驱动程序，包括接收主机来的数据（deserial）和发送由FPGA产生的数据(serial).该程序的调试需要借助串口调试助手-serial port driver on the fpga, including the receiving host to the data (deserial) and send the data generated by the FPGA (serial) to pc. The program needs the serial debug deb
SPINew
- 一个用普通IO口模拟SPI主机的C51程序，测试通过-One with ordinary analog IO port SPI host C51 procedures, test
03141
- 韦根协议 读取ID卡号内的数据并传入上位机中，通过串口大师显示出来-Wiegand protocol reader ID card and pass the data within the host computer via a serial port master display
i2c_host
- pc端用并口来模拟IIC串口的驱动程序，-programe for IIC host
Drawing-the-host-computer
- 一个使用VB.NET编的旋转机械绘图的上位机，其中有串口通信，鼠标绘图等部分可供参考-Compiled using VB.NET rotating mechanical drawing the host computer, serial communication, mouse, graphics, and other parts available
omrom-CPM2AH-and-Host-Link
- omron cpm2ah host link 通讯程序源码，根据PLC站号读取DM参数与写入DM参数-Omron cpm2ah host link communication program source code, based on the PLC station, read the DM parameters and write to DM