搜索资源列表
PC机串口（COM）实验器程序
- 用来模拟PC机的串口，实现各种串口数据读写的功能！-used to simulate the PC serial port, serial data of various functional literacy!
liangs_串口调试器2002
- 用于串口应用程序的调试监控工具，软件可模拟设备往串口发送指定格式的数据串，同时也可以用于实时监控串口读写过程中的所有数据流。☆ 自动侦测当前系统中所有可用的串口数，支持USB扩展出的虚拟串口（可到COM256）。☆ 支持ASCII码和十六进制数据格式的发送和接收。☆ 可以自由选择侦测的串口，接收数据区的容量可以无限大。☆ 发送、接收数据区的大小可以随意拉伸调节。☆ 对发送、接收数据区加入鼠标右键菜单的支持。☆ 扩大串口波特率的支持，现最高Baud可到921600。☆ 支持Unicode内码显示
xiebo
- 电力谐波测量装置对电量,谐波等数据的模拟各种曲线图,使用vc开发.-power harmonic measurement device on electricity, such as harmonic data to simulate curves, the use of vc development.
SPI_NorFlash SST25VF016B进行快速读写
- 对SPI flash ，SST25VF016B进行快速读写，采用软件模拟SPI总线的SPI0模式。-On the SPI flash, SST25VF016B fast read and write, using software to simulate the SPI bus SPI0 mode.
serial_null.rar
- SUDT SerialNull 是一款虚拟串口的专业配置工具，主要用于模拟RS232串口的虚拟连接，适用于串行口相关的软硬件开发、测试工程师。在系统中所创建的虚拟串口在功能以及使用上与真实物理串口一致。可以在不占用真实串口的情况下，创建任意数量并互为连接的纯虚拟串口对。 ,SUDT SerialNull is a virtual serial port configuration of the major instrument, mainly used to simulate a virtual
Analogmeter
- 模拟电表软件，主要模拟电表数据、遥测数据、参数修改、报文显示、可以模拟2个电表（可以自行修改增加），最终通过RS232转485输出-Analog meter software, the main analog meter data, telemetry data, parameter modification, message displays, you can simulate two meters (which can be modified to increase its own), th
serial
- 串口调试工具，类似于串口调试者，并模拟串口，可进行多串口操作-Serial debug tools, similar to serial debugging, and to simulate serial port, serial port operation can be carried out more than
cpldpcvhdl
- cpld与pc机通信的VHDL代码，用于模拟cs232收发功能-CPLD with VHDL communication pc machine code, used to simulate the transceiver function cs232
SnSetup
- 虚拟串口小程序，可以模拟最大254个串口，为那些电脑没有串口的用户，和串口少的用户提供方便，界面简单-Virtual Serial Port applet, can simulate the largest 254 serial, serial for those who are not computer users, and the serial port to facilitate users with a small, simple interface
simulator-vehicle-detector
- 多线程车辆检测器模拟程序（多线程串口发送）可设置模拟车辆速度（最大车速和最小车速）及车流量 注意：只有计算机有串口存在才能运行-Multithreading vehicle detector simulation program (multi-threaded serial port) can be set to simulate vehicle speed (maximum speed and minimum speed) and traffic volume Note: there is
compl
- 串口通信，c++实现，可以模拟两台主机间的串口通信。vc6.0测试通过。-Serial communication, c++ implementation can simulate serial communication between two hosts. vc6.0 test.
VGPS
- 通过串口模拟GPS的程序，用鼠标相对于屏幕中心位置的偏移来模拟移动速度。-GPS through the serial port simulation program, with the mouse position relative to the center of the screen to simulate the speed of the offset.
liquid-container
- 此程序可以模拟一个液体容器在不同速度下的上下水位过程，对于初学者有很大的帮助。-This program can simulate a liquid container at different speeds the process up and down the water level, is very helpful for beginners.
103Server
- 辅助通讯规约测试的程序，支持串口103规约，可以模拟四方、南瑞等厂家的保护装置，通过修改配置文件，可以对应保护的点号及实际值。-Auxiliary communication protocol testing procedures, supporting serial 103 of the Statute, can simulate the Quartet, NARI and other manufacturers of protective devices, by modifying the
IO-Simulate--Uart
- 在没有串口资源的时候,而又需要使用串口时,利用IO口,模拟串口通信-In the absence of serial resources, but need to use the serial port, the use of IO ports, analog serial communication
SerialSend
- 用于模拟串口通信的程序，方便测试人员进行串口测试。-Used to simulate the serial communication program to facilitate testing for serial testing.
Simulate-UART
- I/O口模拟5个串口程序，根据上位机指令选择相应的模拟串口-The program simulates 5 serial-ports,and according to the host computer command to select the appropriate serial port.
8025-driver
- 具有IIC接口的时钟芯片RX8025的驱动代码，模拟IIC时序。-Driver code of RX8025 which have IIC interface，the code is simulate the IIC timin
7718Driver
- 高进度AD采样芯片AD7718的驱动代码，模拟ISP接口-High progress AD sampling chip AD7718 s driver code,simulate ISP interface
ModBusPoll
- MODBUS主站调试工具，仿真工具，可以模拟主站，对从站设备进行调试-MODBUS master debugging tools, simulation tools that can simulate the main station, on the slave device for debugging