搜索资源列表
TIME-SYNC-2051
- 工厂时间同步的单片机的源程序,驱动6个数码管-factory SCM time synchronization of the source, drive six digital control
USB2.0_Slave_FIFO_Sync
- This a CY7C68013 (USB2.0 Chip) Configuration example for Slave FIFO Mode with Sync Signal.
SyncData.rar
- SyncML 协议的同步实现的数据备份,是基于wince平台,,也可很容易移植到其它平台,SyncML synchronization of data backup, is based on Jack platform, and can be easily ported to other platforms
sync(shipintongbuxinhao).rar
- 基于QuartusII环境下以模块化的形式做成的视频复合同步信号。,QuartusII-based environment to create the form of modular composite video sync signal.
manchester-coding
- 使用51单片机进行曼彻斯特编解码，编码程序中有同步头，结束位设置，解码有查找同步头，有效跳变检测等程序，内有proteus仿真原理图-With 51 single-chip codec to Manchester, there are sync, the end bit is set, decode sync with search, detection procedures are not effective, there proteus simulation schematic
LGN_PC-Sync_USB_Driver
- USB RNDIS Garget driver.
Embedded-Linux-GPRS
- 嵌入式Linux下实现GPRS拨号上网 本人使用FriendlyARM开发板（miniARM2440）与GPRS模块（SIM300，用广州动感地带的手机卡，cmnet 连接）实现了基于PPP的拨号上网，方法如下： 1.首先得让内核支持PPP，进入Linux 内核目录（kernel-2.6 或 以上内核版本），执行 #make menuconfig 添加如下内核选项： Device Drivers ---> Network device support ---> <
SDH_module
- SDH帧同步头的检测，并提取其中的语音信息的模块设计-SDH frame sync detection, and extract audio information module design
3Channel_CIS_Processor_with-VHDL.ZIP
- This usefull source for control CIS Sensor and has fallowed functions 1) Read image data frome 3channel 200dpi CIS Sensor 2)Encoder Sync Technoledge for more high resolution analiysys with shared the time divition 3)Psudo Video Ram Read by
costas_loop
- 集中式插入式帧同步发的verilog源代码-concentrative inserted frame sync
b-sync
- VxWorks中，二进制信号量用于任务间同步。-VxWorks, the binary semaphore for inter-task synchronization.
count64
- 将5MHz时钟信号分频后得到1.6/3.2秒可选的同步信号，还可接外接同步信号对其进行强制同步-To 5MHz frequency clock signal 1.6/3.2 seconds after the optional sync signal, external sync signal can then be forced synchronization
FX2Test
- 程序描述：使用Cypress提供的EZ-USB开发工具包进行基本的固件程序设计。安装时把源码拷贝到硬盘特定目录下，使用Keil C编译器运行即可。但要添加完整的头文件及库文件才可以编译。 BasicUSB.SchDoc 电路原理图 FX2Test/FX2Test.Uv2 Keil C51工程 FX2Test/EZUSB.LIB EZ-USB库文件 FX2Test/dscr.a51 USB描述符 FX2Test/USBJmpTb.OBJ USB中断跳转表 FX2Test
Novatek
- LCD Monitor 源码 mode change and Sync Source-Novatek NT68665 Source code
AudioVMix
- 通过SDI信号的行同步，列同步和场同步，并通过对行和列的像素点进行计数限制来输出处理后的SDI数据-SDI signal through the line of synchronization, the column sync and field sync, and through pairs of rows and columns of pixels counted restrictions to the SDI output of processed data
DecoderSync
- 本程序用来分离出行同步，列同步和场同步信号，分离后可以得到Hs,Vs和，Fs三个同步信号-This procedure is used to separate travel synchronization, the column sync and field sync signals can be separated Hs, Vs, and, Fs 3 sync signal
manchester_encoding
- 用电压的变化表示0和1.规定在每个码元中间发生跳变.高→ 低的跳变表示0,低→ 高的跳变表示为1,也就是用01表示0,用10表示1.每个码元中间都要发生跳变,接收端可将此变化提取出来作为同步信号,使接收端的时钟与发送设备的时钟保持一致.-With the voltage changes that have 0 and 1. Provides that each code element transitions occurring in the middle. High to low transi
FileSyncSample
- This sample shows how to use the file synchronization provider component of Microsoft Sync Framework. The file synchronization provider is a fully functioning provider that helps an application to synchronize files and folders in NTFS, FAT, and
VxWorks.semaphore.mechanism.sync.tasks
- VxWorks信号量机制任务同步资料VxWorks semaphore mechanism to sync tasks -VxWorks semaphore mechanism to sync tasks
stm32f030x8-SPI-slave-with-sync-master
- stm32f030x8 SPI slave with sync