搜索资源列表
51单片机系统中运用电脑上的大键盘
- 51单片机系统中运用电脑上的大键盘！ Keyboard接线 PS/2--------51 1 DATA------P3.4 3 GND 4 VCC 5 CLK-------P3.3 接在51的外部中断，触发方式为低电平 AT89x51使用12M Modified by Shen Peng! Postgraduate of 2003, 7 Department Harbin Engineering University-51 microcomputer system on the use of t
SH207
- 微机键盘和单片机的接口程序,采用了上升沿触发中断服务程序,下降沿触发中断服务程序.-computer keyboard and microcontroller interface procedures using the rising edge trigger interrupt service procedures, falling edge triggering a break in service procedures.
keyINT
- 44B0的测试程序。此程序为44B0的4*4键盘的应用程序，基于中断0触发，当按下其中一个键时，会把0-F的相应键值显示在8段LED上。-44B0 testing procedures. This procedure for the 44B0 4 * 4 keyboard applications, based on the interruption 0 trigger, which when pressed a button, will be 0-F to the corresponding
交交变频矢量控制
- 交交变频矢量控制DSP部分，也是核心部分，输出为最终触发角度-Cycloconverter DSP vector control, is the core part of the output for the final trigger point
time_OS
- 时间触发式51单片机嵌入式多任务系统，也可移植到其它单片机系统中，可以分辨到ms级。-time trigger-51 multi-task embedded microcontroller system, can also migrate to other SCM system can distinguish between levels of ms.
MSP430adcuart
- MSP430定时器触发ADC并送串口的程序，不同于官方网站，适用于F14X,F16X系列-MSP430 timer trigger serial ADC and sent to the procedures different from the official website applies to F14X, F16X Series
ucosISR
- 基于UCOS的中断处理程序 当按键按下时,相应的外部中断触发产生 执行处理程序-interrupt handling procedures when pressing the button, the corresponding external interrupt trigger implementation procedures have
pluse_delay
- 利用VHDL语言实现单稳触发电路，稳态时间为系统时钟的整数倍。-using VHDL-trigger circuit stability, steady time for the whole system clock several times.
LED_INT
- 在WinCE系统中应用程序直接获取中断触发和直接操作I/O口，进行读取和写入。从而减少驱动程序的开发-in WinCE systems applications direct access to trigger disruption and direct operation of I / O port, for read and write. Reduce Driver Development
trigger
- 用vhdl对于GAL22V10编程，实现触发器功能-Using VHDL for GAL22V10 programming, realize trigger function
LM3SLib_ADC_Multi-Trigger
- LM3S系列ADC例程：多种采样触发方式 LM3S系列ADC例程：多种采样触发方式-LM3S Series ADC routine: a variety of sampling trigger LM3S Series ADC routine: a variety of sampling trigger
four-trigger
- 一个使用单片机实现四路触发锁存器的程序，可供初学者学习单片机模拟逻辑芯片的一些简单功能。-MCU four trigger latch program for beginners to learn some simple the microcontroller analog logic chip functions.
trigger
- D触发器和JK触发器，使用emacs编写源文件，iverilog仿真通过，内有png仿真图像截屏-D flip-flop and JK flip-flop, use emacs to prepare source file, iverilog simulation adopted, within the simulation images png screenshots
Schmitt-trigger-keyboard-interface
- 基于施密特触发的键盘接口电路，有效降低触发延迟，缩短键盘反应时间 以verilog实现-Schmitt trigger on the keyboard interface circuit, effectively reducing the trigger delay and shorten the reaction time to verilog implementation keyboard
Time-trigger-system
- 时间触发嵌入式系统设计模式 单片机设计必备-Time trigger system
MAT-trigger-the-ADC-conversion
- ARM2378的MAT触发ADC转换实例！-The ARM2378 MAT trigger the ADC conversion instance!
P2.10-trigger-the-ADC-conversion
- ARM2378的P2.10 触发ADC转换实例！-The ARM2378 P2.10 trigger the ADC conversion instance!
software-trigger-the-ADC-conversion
- ARM2378的软件触发ADC转换实例,可用于学习！-The ARM2378 s software trigger the ADC conversion instance！Can be used to learn!
External-interrupt-0-level-trigger
- /*--- --- --- --- --- --- --- ----- 名称：外部中断0电平触发 内容：通过中断接口P3.2连接的独立按键测试，按一次P1口的LED灯反向， 这里使用电平触发，所以一直按键不松开和一次按键效果不相同，按下会看到灯全部亮 说明中断一直在作用- Name: External Interrupt 0 level trigger : Interrupt the interface P3.2 connection, independent
TIMER-trigger-adc-transmission-DMA
- stm32定时器触发adc的dma传输,可减轻cpu的负担，提高传输效率-stm32 timer trigger adc transmising through dma