搜索资源列表
交交变频矢量控制
- 交交变频矢量控制DSP部分，也是核心部分，输出为最终触发角度-Cycloconverter DSP vector control, is the core part of the output for the final trigger point
instrument
- 利用TI54系列DSP的测试仪器的触发运算通信以及时基功能实现的程序-use of the TI54 Series DSP trigger test equipment and communications operations at the base functions of the procedures
int_led_key_demo_for_44b0
- S3C44B0的外部中断测试程序，按键通过Eint6触发中断-S3C44B0 external interrupt testing procedures keys trigger interrupted by Eint6
emiftofifo
- This program uses the HF flag of a FIFO to trigger reads, guaranteeing that the FIFO is never blocked for the writer, giving high throughput for the reader (bursts of D/2 = 128) and guaranteeing that the the reader will not be stuck in the top half o
com_trig
- DSP2812控制无刷直流电机 无传感器直流无刷电机驱动器的变换触发发生器单元-DSP2812 sensorless control of brushless DC motor drive DC brushless motor generator unit change trigger
F2812_AD02
- F2812 AD02 T1周期中断启动ADC，实现ADC模块16路通道的采样.AD采样频率为10K，序列发生器SEQ1和SEQ2级联成一个16通道的序列发生器，采样模式采用并发采样。利用通用定时器T1的周期中断来触发AD转换。-F2812 AD02 .T1 cycle interrupt start ADC, the ADC module 16-channel sampling. AD sampling rate of 10K, the sequence generator SEQ1 and S
SourceCode09_EXT_INT1_OK
- DSP２８３３５的外部中断源代码，实现按键的触发中断-DSP28335 external interrupt source to achieve the key trigger interrupt
TMS320DM642softwareTrigEDMAbyHizog
- TMS320DM642软件触发EDMA的CCS的配置文档和C语言触发语句。在工程中可以完全正常使用。前段时间没找到具体的配置，所以就上传一个。-TMS320DM642 trigger EDMA software configuration of the CCS documents and C language statement trigger. In engineering can be completely normal use. Earlier did not find a specifi
timer_trigger_adc_PLL_SUCCESS
- DSP2407定时器触发ADC，并且进行软件锁相环的实现。-DSP2407 timer to trigger ADC, and the realization of a software phase-locked loop.
2407ADC
- 该程序用事件管理器B的定时器4定时时间来触发A/D采样的启动。采样时采用级联模式，一次做16个转换，转换通道分别是0~15。转换完成后，在A/D中断服务子程序中将转换结果读出。该程序做一次A/D采样。 -The program manager with the events of the timer 4 timing B to trigger A/D sampling start. Sample used in cascade mode, do a 16 conversion, conver
ADCcalibrationV11
- This example program runs from RAM on the EzDSP. It initializes the event manager to generate a periodic start of conversion (SOC) pulse to the ADC. This will trigger a conversion of the ADC and when completed the ADC will generate an interrupt. The
tms320f28335_adc_examples
- tms320f28335芯片adc模块的详细配置以及各种采样模式的例程，包括自动触发模式、dma模式、多级排序模式等。-tms320f28335 chip module adc detailed configuration and a variety of sample models routines, including automatic trigger mode, dma mode, multi-level sorting mode.
Produce60degree6wayphasepwm
- 基于美国德州仪器公司的TMS320F2812的事件管理器产生相位差60度的6路PWM脉冲输出，可用于晶闸管主电路的触发。-Texas Instruments TMS320F2812-based event management company generates 60-degree phase 6-channel PWM pulse output can be used to trigger the main circuit thyristor
edma_transfer
- This program uses the timers to trigger EDMA events. These events in turn trigger linked EDMA parameter tables to fill a ping pong buffer structure.Set a breakpoint on processbuff function. Then open two memory windows.Use ping as the address for one
hrpwm_sfo
- TI公司的DSP280xPWM程序，频率的计算，PWM触发源，占空比变化。-TI' s DSP280xPWM procedures, frequency of calculation, PWM trigger source, the duty cycle changes.
C6000_EDMA_development_kit
- TI的C6000的EDMA编程示例程序库，包含块搬移、乒乓搬移、触发式搬移等多个例程，并附有详细的说明文档，给用户开发DMA带来很大方便，稍作修改即可用在自己的程序中-TI' s C6000 examples of EDMA programming library, including the block moving, moving ping-pong, trigger-type move and many other routines, together with detailed d
semtest
- 此为DSP/BIOS C6713关于信号量的调度实现，为程序员很好理解BIOS关于信号量触发、等待等操作有很好的帮助。-This is the DSP/BIOS C6713 scheduling on the semaphore implementation, good understanding of BIOS for the programmer to trigger on the semaphore, wait for the other operations have a very go
ad
- ADC模块1ms采样一次，由EVA的T1周期中断标志来触发，两路模拟信号使用ADC的通道0和通道1，并带有排队滤波函数-ADC module 1ms sampling time, the EVA of the T1 cycle interrupt flag to trigger, two analog signals using the ADC channel 0 and channel 1, and the filter function with a line up
12345
- DSP1812 寄存器 功能描述 一个ePWM module包括Time-base (TB) module，Counter-compare (CC) module，Action-qualifier (AQ) module，Dead-band (DB) module，PWM-chopper (PC) module，Event-trigger (ET) module，Trip-zone (TZ) module等七个模块。正常的发出PWM波要配置TB、CC、AQ、DB、ET等五个模块。-DSP18
edmatest_3.29
- 完成了EDMA的大块数据的搬移（手动触发方式,在L2和DDR之间）-EDMA completion of the bulk data move (manual trigger mode, between the L2 and DDR)