搜索资源列表
UltraCTR
- ULTRACTR的源码，xps工程实现，基于PPC平台-ULTRACTR source code, xps engineering, based on the PPC platform
system_timer
- 基于EDK平台的LED显示程序,通过SDK本身的接口说明，来写程序，该程序用到很多XPS自身定义的API用户函数-This program is used for light four LEDs which bases on the EDK platform
mbtutorial
- This tutorial guides you through the process of using Xilinx Embedded Development Kit (EDK) software tools, in which this tutorial will use the Xilinx Platform Studio (XPS) tool to create a simple processor system and the process of adding a cust
Avt3S400A_Eval_MicroBlaze_v10_1_03
- Creating Your First MicroBlaze Design with the Spartan-3A Evaluation Kit This tutorial shows how to make use of XPS, BSB, and an XBD file to create and use a MicroBlaze soft processor system for the Avnet Spartan-3A Evaluation Kit.
source
- 有关xilinx的ip核的几个实验，中教仪器-xilinx ip XPS General Purpose Input/Output (GPIO),led_8bit
clock
- XPS做时钟的配置过程基于EXCD-1开发板,其实是基于xilinx的ISE来开发的，但是开发环境没有这个就这能选VHDL，另外是verilog的，呵呵。希望大家能够真正用上，挺好的“基于ISE的时钟”-XPS to do the configuration process is based on the clock EXCD-1 development board, in fact, is based on the xilinx the ISE to develop, but not the
05_UART_demo
- 该UART实例是很简单的EDK工程，在PLB总线上挂载了XPS-uartlite外围设备，作为串口的控制器，一般的EDK工程会将该IP作为基本外围设备来使用。包含bit流文件(在EDK上下载到FPGA上使用），和说明文档。-The UART instance EDK project is very simple and is mounted on the PLB bus the XPS-uartlite peripherals, general EDK works as a serial con
red
- microblaze控制LED和开关。适用于初学者学习XPS-microblaze VHDL C
Lab4
- 基于zynq开发板的嵌入式系统一个demo，实现led点亮。使用xps开发工具实现的。-Zynq development board based on an embedded system demo, realization led lights. Use xps development tools to achieve.
memory_test_edk_14p7_2
- 基于FPGA的流水灯程序，使用XILINX FPGA实现，在XPS平台上编写。压缩包是整个源工程。-FPGA water lamps procedures based on XILINX, using FPGA implementation, written in XPS platform. Package is the source project.
Pico_Lab3_Uart
- FPGA嵌入式编程,PicoBlaze实现方式。ISE和XPS混合方式-FPGA embedded programming, PicoBlaze implementation. ISE and XPS hybrid approach
ucos-ii-transplanted-to-FPGA
- 将ucos-ii移植到FPGA-PowerPC405-XC2VP30FFG896C上，包含ucos-ii源码和移植源代码，使用的软件是XPS-The ucos-ii transplanted to FPGA-PowerPC405-XC2VP30FFG896C, comprising ucos-ii Source and portable source code, the software uses the XPS
Learning-and-using-the-SDK
- SDK 是嵌入式系统的软件开发工具，在硬件平台的基础上完成相应的软件开发任务， 其基本操作包括：从 XPS 导入硬件平台、建立软件平台、编写软件应用工程、配置芯片以 及硬件调试等流程-SDK embedded systems software development tools, complete the corresponding software development tasks on the basis of the hardware platform, the basic opera
XPS_Custom_IP_Tutorial
- Tutorial to create a custom AXI based IP for Xilinx
XPS_Custom_IP_Tutorial_2
- Custom IP Core Development tutorial in Xilinx XPS
XPS_Custom_IP_Tutorial_3
- Custom IP Core Development tutorial in Xilinx XPS Part 3
XPS_Custom_IP_Tutorial_1
- Custom IP Core Development tutorial in Xilinx XPS Part 1
XPS_Custom_IP_Tutorial_4
- Custom IP Core Development tutorial in Xilinx XPS Part 4