搜索资源列表
21IC ARM微控制器LPC210X的LCD接口技术
- 摘要：本文分别以GPI0口直接连接、串行转换连接、CPLD分部连接三种方法阐述了无外部总线的Philips ARM微控制器LPC210X与点阵图形液晶显示器的接口设计，并给出硬件电路框图和主要程序。 -Abstract : GPI0 I were to directly connect a serial link, connecting CPLD Division three methods described without external bus Philips LPC210X ARM
pmmain
- 一端连续波功率计的显示程序的主程序，有兴趣的朋友可以-end CW power meter shows the main program procedures, interested friends can s
lpc2104、05、06的ads模版
- 周立功的lpc2104、05、06的ads模版，可直接使用，在main中添加自己的程序-meritorious lpc2104 weeks, the ads'06 templates can be used directly, the main added its own procedures
skyeyeanalysis
- skyeye 源码分析，主要分析了针对arm平台的skyeye的运行原理，包括支持芯片，另外还包括了at91在skyeye下面的运行过程。对ARMulator和uclinux都进行了分析。-skyeye source analysis, analysis of the main platform against arm skyeye operating principle, including support chips, in addition to including the Itanium
S3C44B0X例子程序2
- 1. beep -- PWM测试 为 ADS1.2 下编译的项目, 在sdt2.51的ADW里调试，该程序运行后在57600的超级终端里按PC机键盘的“+”“-” 按键，可以听到BUZZ增大减小的声音。 2. key -- 按键测试 为 SDT2.51 下编译的项目, 在sdt2.51的ADW里调试，该程序运行后按FS44B0X上的按键key1 key2 key3 key4 相应的发光二极管亮 3 keyint -- 按键中断测试 该项目在SDT2.51下编
S3C44B0X例子程序1
- 5 ledblink -- 跑马灯程序 该项目在SDT2.51下编译调试。最简单的demo程序，运行后3个发光二极管轮流点亮。 6 timerint -- 定时器中断demo程序 该项目在SDT2.51下编译调试。将子目录timerint拷贝到c:\\ 下。 该demo程序的主程序是while空循环，定时器中断服务程序每500ms将3个LED反相。 在57600超级终端里也可以看到中断发生时的信息。 7 uart -- 串口测试程序 该项目在SDT2.5
AT91RM9200-BasicISO7816-ARM1_2-2_0
- This zip describes an ISO7816 configuration to read the ATR. Includes main.html file for help. For use under Green Hills 3.6.1 Multi?2000 Software Tool. -This describes an ISO7816 configurati read on to the ATR. Includes main.html file for h E.coli.
AT91RM9200-BasicSPIDataFlash
- This zip describes SPI communication with a Serial DataFlash AT45DB and/or with a DataFlashCard AT45DCB. It shows how to configure the SPI peripheral on the AT91RM9200EK. Includes main.html file for help. For use under Green Hills 3.6.1 Multi?2000 So
main
- Main Program using in ARM PlatForm
utu2440-main-f-v41
- utu2440-main-f-v41 ok
main
- nand boot memory main-nand boot memory main
Main
- program is for main.c
main
- Main file for microcontroller (ARM)
main
- AT91SAM7S256 Getting Started main
Freescale-main
- 飞思卡尔主程序，经过测试有效，欢迎下载使用！-Freescale main
main
- NIOS 串口的主程序 通过NIOS接受发送PC端的数据-NIOS serial port of the main program to send the PC side of the data accepted by NIOS
main
- I2C通信，非常详细，主控制器单片机和外围器件通信协议。请大家学习。-I2C communication is very detailed, the main controller MCU and peripheral devices communication protocols. Please learn.
main
- STM32F103RBT6 ADC-DMA-NVIC INITIATED AND SIMPLE (SLOW) FFT RUNNING IN MAIN - SOME COMMENTS ARE INCORRECT
main
- 基于智造者STM32开发板的内部FLASH读写main程序-Based on internal FLASH wisdom made by STM32 development board to read and write the main program
Main
- s3c2440裸机串口驱动程序,包括接收和发送，这个是主函数-S3c2440 bare metal serial driver, including sending and receiving, this is the main function