搜索资源列表
HH2410_ts
- minigui1.3.3的HHARM2410-R3的触摸屏驱动有些问题，这时修改过的驱动源程序，直接覆盖原文件即可。-minigui1.3.3 the HHARM2410-R3 touch screen driven some issues, Then the modified source-driven, direct coverage of the original documents.
uclinuxserial
- 本例为嵌入式linux平台下的串口开发实例，开发原始平台为华恒HHPPC860-3COM-2ETH-R1，可根据需要进行修改。-the cases for embedded Linux platform under development Serial example, development of the original platform for huaheng HHPPC860 - 3COM - 2ETH-R1, may need to be modified.
rtl8187b-modified-jadams-2-1-2008.tar
- linux driver for realtek 8187b
u-boot-dm646x.tar
- DM6467芯片u-boot源码，用户可修改后移植使用-DM6467 chip u-boot source code, users can use the modified transfer
rtc-ds3231
- ds3231驱动，rtc_tempereture芯片，高精度时钟芯片外加温度测量！本人在rtc_ds1672.c上修改的，直接替换linux(2.6.19)里的该文件，就可以使用了。-ds3231 rtc_tempereture chip, high-precision clock chip temperature measurement plus! I modified the rtc_ds1672.c on, direct replacement for linux (2.6.19) in
SVM
- SVM的源码，有不足之处，仅供参考只用,待达人修改。-SVM s source, there are deficiencies, only used for reference only, to be modified by Tatsu.
tsc2003c
- TI四线式电阻触摸芯片TSC2003LINUX驱动，根据Bill Gatliff版本修改而成！国产兼容芯片CS7103（IIC协议）。-TI four-wire resistance touch TSC2003LINUX driver chip, according to the version modified by Bill Gatliff! Domestic compatible chip CS7103 (IIC Protocol).
s3c2410fb_driver
- 嵌入式平台下的LCD驱动源代码，可以修改后实现多种尺寸大小的LCD驱动-Embedded platform LCD driver source code, can be modified to achieve a variety of sizes of LCD driver
uart_test
- arm2440下，linux2.6内核串口通信应用程序，各参数在源码内可灵活修改-arm2440 under, linux2.6 core serial communication applications, the parameters in the modified source code can be flexible
u-bootporting
- 基于U-boot-1.1.6的移植，具体的修改源码内容。-Based on the U-boot-1.1.6-graft, the specific content of the modified source code.
cgi-webpage-dm644x
- this source code is modified from GOAHEAD web cgi to fit for dm644x, just download and compile it directly, to use it , see README inside.
taihu_filesystem_v2[1].tar
- 该内容提供了jffs2文件系统，嵌入式开发人员可以在此基础上修改，便可以开发出自己的jffs2文件系统。-The content of the jffs2 file system, embedded developers can be modified on this basis, they can develop their own jffs2 file system.
Linux
- 程序代码使用说明： (1)所有源代码目录下都提供了Makefile（非Qt），或者.pro（Qt），或者更详细的说明（第7章）。作为对比，也可以参考在书中的对应章节采用直接gcc命令的编译方法，来学习如何编写Makefile。 (2)Makefile中默认情况下采用“CC=gcc”或者“CPP=g++”的设置，交叉编译时请使用“ make CC=arm-linux-gcc CPP=arm-linux-g++”（假设你使用的是光盘中提供的arm-linux-gcc交叉编译工具链）或类
source
- 一个将输入的字符转变为类点阵字体,然后在屏幕上动态显示出来的小程序,能在MOTOROLA E8机型上运行,稍修改后可以在其他MOTO LINUX机型上面运行.-One will be entered into a class character dot-matrix font, and then dynamically displayed on the screen a small program that can run on the MOTOROLA E8 model, slightly m
qvfb
- qt4.6.2中的qvfb源码 修改了的能直接运行-qt4.6.2 in qvfb energy source modified to run directly
s3c2440camera_driver
- 三星2440摄像头接口驱动（camera接口），文件类型读取。可修改为saa7113解码芯片v4l2视频驱动-Samsung 2440 Camera Interface Driver (camera interface), file type read. Can be modified to saa7113 v4l2 video decoder chip driver
at91sam9260_ADC
- at91sam9260的linux的ADC驱动，8位精度，可以修改成10位模式，AIN0--AIN3,四通道输入。应外附上测试程序，方便调试。-at91sam9260 of linux the ADC driver, 8-bit precision, can be modified into a 10-bit mode, AIN0- AIN3, four-channel input. Outside the testing procedure should be attached to faci
fb_v4l_display
- 利用v4l采集图像数据，并送framebuffer显示，执行一次采集一帧，可修改成连续采集-Using v4l capture image data, and send framebuffer display, perform an acquisition one, can be modified into a continuous acquisition
jlink_write_nand
- 修改过的uboot可以用于jlink烧写2440 autoboot和uboot 方便无并口设备开发-Modified uboot can be used to program the 2440 autoboot and uboot jlink facilitate the development of non-parallel device
UM0886
- A parking ticket vending machine is a hand-held, battery operated device, inside of which a thermal printer is interfaced with the STM32 microcontroller from STMicroelectronics. This document focuses on the STEVAL-IPC002V1 demonstration board, wh