搜索资源列表
CAN_arm_LPC2119
- 基于LPC2119的CAN驱动及例子 循环发送实例程序 简单的CAN中继器实例，用到验收过滤寄存器 CAN和RS232透明转发器 基于uCOSII的CAN和RS232透明转发器 等-based LPC2119 CAN drive and examples of this cycle of a simple example of CAN Repeater is cases, Register acceptance filter used CAN and RS232 transp
Can
- 富士通单片机MB902420系列 CAN Project: CAN0 will work as a simple Repeater. Received data will appear at Port P47..P40 (UserLEDs of FlashCan100P) and will send out again as byte-packages to ID#2 Receive-Buffer #1 : basic can Transmit-Buffer #6 :
CANZJ
- 是一个CAN转接的程序，即相当于CAN中继器的作用，延长CAN数据的通信距离-CAN adapter is a procedure, which is equivalent to the role of CAN repeater to extend the CAN data communication distance
amis-42700-EEOL_2008NOV04_INTD_NETD_AN_01
- 一款最新的CAN总线中继和扩展芯片,可以支持到1M/S.-A new CAN bus repeater and expansion of the chip can support to 1M/S.
CAN
- MCU为LPC2119，c语言，can通信循环发送实例程序，收到数据后回发的CAN收发实例程序 ，简单的CAN中继器实例，用到验收过滤寄存器，CAN和RS232透明转发器。-MCU for the LPC2119, c language, can send examples of procedures for communication cycle, the data received back to the CAN transceiver made examples of the proc
nxp(done)
- 飞利浦NXP P89LPC936单片机的程序，使用了该单片机的大部分资源：使用了3个AD，1个DA，定时器，串口中断等等。本人严格测试通过。程序内容是控制光纤直放站的功率放大模块控制器。-Philips NXP P89LPC936 microcontroller program, use most of the resources of the MCU: Using the 3 AD, 1 个 DA, serial port interrupts, and most of the memory
A-new-magnetic-compass-repeater
- 一种新型复示磁罗经控制方法研究A new magnetic compass repeater control method-A new magnetic compass repeater control method
zhongjiqi
- 中继器是门口机与室内机的链接纽带，多户公用一个中继器，中继器自动分辨户的功能-Repeater is a door unit and indoor unit linked bonds, multi-family public a repeater, repeater function automatically identify households
tape-recorder
- 使用凌阳61单片机实现复读机功能，包括C主程序，asm程序，链接文件等。-Sunplus MCU with 61 repeater functions, including C main program, asm program, links, documents.
jiankong
- 已经调试好的中继器监控程序，对于学习监控的人是个不错的选择-Has been debugged repeater control procedures for monitoring learning are a good choice
record
- 基于凌阳61单片机实现复读机的功能，已经过验证，绝对可用-Sunplus 61 single chip microcomputer based on the function of the repeater, has been validated and absolute available
Rs485Pio
- MSP430下的RS485中继器程序 RS485电平的检测与信号再生功能-MSP430 under the RS485 repeater procedures RS485 level of detection and signal regeneration
zhifangzhanV1.0.rar
- 基于PIC单片机开发的直放站项目源码，希望对所需要的朋友有所帮助。,PIC microcontroller the repeater project source development, I hope to help friends.
ics_demo
- 使用MSP430F5328进行数字直放站配置及人机接口通讯并带有ICS功能-Digital Optical Repeater (DR/DOR) base on MSP430F5328 with ICS function.
MCP2515-send-onebyte-125kbps
- 通过CAN总线将一个字节发送出去。功能描述：CAN通信测试程序，CAN中继器的功能。 IDE环境：keilC。 CAN_ Send: CAN发送子程序,查询发送。 硬件连接： AT89S51/52+MCP2515-CAN bus via a byte sent. Descr iption: CAN communications test program, CAN repeater function. IDE environment: keilC. Constitutive documents:
B-MCP2515-receive-onebyte-125kbps
- 通过CAN总线接接收一字节数据再串口转发出去 功能描述：CAN通信测试程序，CAN中继器的功能 IDE环境： keilC Init2515： 2515初始化程序 CAN_ Send: CAN发送子程序,查询发送 CAN_Receive：CAN接收子程序，中断接收 硬件连接： AT89S51/52+MCP2515-Via CAN bus interface receives a byte of data and then forwarded out the seria
Button-sends-8-bytes-of-data
- 通过CAN总线将b[8]={0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08}发送出去 CAN通信测试程序，CAN中继器的功能 IDE环境： keilC 2515初始化程序 CAN发送子程序,查询发送 CAN接收子程序，中断接收 硬件连接： AT89S51/52+MCP2515-Via CAN bus b [8] = {0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08} sent CAN
CAN-receive-8-bytes-forwarded
- 通过CAN总线接收八个字节数据在转发发出去 CAN通信测试程序，CAN中继器的功能 2515初始化程序 CAN接收子程序，中断接收 AT89S51/52+MCP2515-Receive eight bytes of data via CAN bus sent to the forwarding CAN communications test program, CAN repeater function 2515 initialization procedure
ZigBee-IR-repeater
- Zigbee红外转发器可控制电视剧、空调等一些家用红外设备-Zigbee IR repeater can control the TV, air conditioning and some other home infrared device
esp_wifi_repeater-master
- esp8266的WiFi中继支持固件以及源代码（C/C++语言），使esp8266具备WiFi中继功能(WiFi Repeater Support Firmware for esp8266)