搜索资源列表
stm8s003-manual
- stm8s003开发手册 s tm8s003开发手册-stm8s003 manual stm8s003 manual stm8s003 manual
stm8s003-8.4V
- 单片机控制，升压，降压单独IC 4个指示灯，一个完整的方案，希望对大家有所帮助！-MCU control, boost, buck-alone IC 4 LEDs, a complete solution, we want to help!
TimerSwitch
- 用STM8S003单片机做的一个电子定时开关，程序包括了对75HC595、PCF8563的、数码管、定时器、按键、EEPROM等的操作，供初学者参考。-STM8S003 microcontroller to do with an electronic timer switch, the program includes support for 75HC595, PCF8563, and digital control, timer, buttons, EEPROM and other opera
STM8S003_RN8209
- 开发环境IAR STM8S003驱动RN8209，对RN8209寄存器读写 可以通过UART将RN8209的寄存器值发送到上位软件，波特率96-IAR for STM8S STM8S003 R/W RN8209
GPIO
- STM8S003作为主控，采用SI4432实现无线数据通讯和数据传输。完整工程-STM8S003 as the master, using SI4432 wireless data communications and data transmission. Complete works.
STM8S-USB-master
- 这是一个stm8S003模拟USB键盘HID的程序，首先，通过中断来接收USB数据，接收完后，调用 void usb_rx_ok(void) 来应答或不应答，并识别数据包，把相应的状态写usb这个结构体里面。 然后，在主循环中不断的调用 void usb_process(void) 来根据 usb 里面的状态来做相应的动作。 设备描述符的发送是这样的：调用 void usb_send_data(uint8_t * buffer, uint8_t lenght)， 将描述符打包，放到 us
STM8-125Khz-RF
- STM8s003+AT24C32+125Khz RF读卡程序-STM8 125Khz RF reader program
stm8s003f_hys3600
- stm8s003 项目代码 （基于stvd编译器）
stm8s003
- 上传一个STM8S003头文件一个，直接地址寄存器版-Upload a STM8S003 header file a direct address register edition
STM8S003-TM1668_Display
- STM8单片机通过TM1668驱动数码管，无delay延时，模块化编程-STM8 microcontroller through TM1668 driven digital control, no delay delay, modular programming
STM8S003-voltmeter
- stm8s003 4-30.00v 数码管显示电压表-stm8s003 4-30.00v digital display voltmeter
I2C_Drive
- stm8系列I2C读写函数库,STM8S003 STM8S005-Stm8 series I2C read and write function library,STM8S003 STM8S005
STM8S003-Key_Scan
- STM8S003-Key_Scan 例程-STM8S003-Key_Scan
STM8S003-TIM2-PWM
- STM8S003 TIM2通道3PWM输出-STM8S003 TIM2 Channel 3 PWM output
Stm8s003-voltmeter
- stm8s003 电压表 原理图与源代码 IAR环境-Stm8s003 voltmeter schematic and source code IAR environment
STM8S003转SC93F5003代码参考
- STM8S003转SC93F5003代码参考,(STM8S003 to SC93F5003 code)
stm8s003原理图
- 距离检测，stm8s003近距离，用于照明应用。(Distance detection, stm8s003, are used for illumination applications at close range.)
SX1278 Demo
- sx1278的demo代码,，用stm8s003单片机，发送接收无线循环(sx1278 demo code,with stm8s003 mcu,tx and rx again and again)
STM8S003PLT8920_TX_RX
- 超级便宜的STM8S003+LT8920收发代码 分TX和RX两个工程 驱动和主函数都有 自己做项目的话可以直接移植使用(Super cheap STM8S003+ LT8920 transceiver code points, TX and RX drive and the main function has its own two engineering project can be transplanted directly to use )
STM8S003_OLED
- STM8S003的OLED(IIC版)驅動,開發環境IAR(1.40)for STM8,已測試過,顯示6x8及8x16字型,顯示40x40點陣圖,指定位置顯示進度條.(STM8S003 OLED (I2C version) driver, development environment IAR (1.40) for STM8, has been tested, display 6x8 and 8x16 font, display 40x40 bitmap, specified position