搜索资源列表
ucos port forf240
- uC/OS-II 在TI TMS320C240上的移植代码-Phone / OS-II in TI's TMS320C240 transplant code
uCOS276andTCPIP
- ucos_ii在44b0上移植，包括lwip的移植，跑在远峰公司的板子上，驱动有点不好-ucos_ii 44b0 on the transplant, including lwip transplant, in the far-run company's board, a little bad drivers
QueueDriver
- uc/osII平台下一个队列数据结构的源代码实现，该代码可以直接应用到用户的程序中而无需做任何改动。-uc / osII platform under a queue data structure to achieve the source code, the code can be applied directly to the user's proceedings without any changes.
UcOsii_all
- UcOs ii的多任务操作系统全部原代码 包含这些cpu的原代码： 8051 68H11 8088 AVR XA 196 TI DSP 54XX ARM C167 68H12 68000 SH3 -UcOs ii multi-tasking operating system source code contains all these cpu's original code : 8088 8051 68H11 AVR 196 XA TI DSP 54XX ARM C167
uCOS-II_WIN32_LINUX_2.1
- UCOSII的PORT代码。真是麻烦呀，这下行了吧-UCOSII the code. Trouble is, that's where initials
ucosip
- 基于UC/OS II操作系统的TCP/IP协议的移植源代码。-on UC / OS II operating system's TCP / IP protocol source code for the transplant.
style_news
- asp源程序一个网站的首页面版，我看了看还是觉得不错的，你也可以试试看．-asp source of a site-Home Edition, I can read or think it's good, you can give it a try.
ucosii_lh79524
- 在LH79524平台上移植ucos的代码，开发板自带的，可直接运行在该平台上。-platform transplant CENTER code, the board's own, can be run directly on the platform.
ADSucos_lib
- 在移植成功ucos核的基础上扩充了该操作系统的许多没有功能。如文件系统，tcp/ip协议栈，GUI等，非常实用。也是前面前几个源码所用库文件的源码程序。-success of the transplant OUT nuclear expansion on the basis of the operating system's many functional. If the file system, tcp / ip protocol stack, the GUI, is very pra
USB_ON_s3c2410
- 基于三星公司的ARM处理器S3C2410的USB传输系统的实现。内部已经移植了UCOS操作系统。-based on Samsung's S3C2410 ARM processor the USB transmission system is achieved. Internal UCOS has ported the operating system.
ucOS-II-GPRS
- ucOS-II应用源码：通过对串口编程来控制GPRS扩展板，实现发送固定内容的短信，接打语音电话等通讯模块的基本功能。利用开发平台的键盘和液晶屏实现人机交互。-ucOS-II application source : Serial Programming right to control the GPRS expansion boards, achieve this fixed content of the messages, then fight voice telephone communi
s3c44b0chumoping
- 当手指或笔触摸屏幕时，平常相互绝缘的两层导电层就在触摸 点位置有了一个接触，因其中一面导电层接通X轴方向的5V均匀电压场(图a) ，使得检测层的电压由零变为非零，控制器侦测到这个接通后，进行A/D转换 ，并将得到的电压值与5V相比即可得触摸点的X轴坐标为（原点在靠近接地点 的那端）：Xi=Lx＊Vi / V（即分压原理）同理得出Y轴的坐标，这就是所有电 阻技术触摸屏共同的最基本原理。-finger or pen to touch the screen, usually two
ucosii2
- 修改了其它人的ucosiifor44b0见博客 http://blog.sina.com.cn/bufengmobuchenghuo-revised the other person's blog ucosiifor44b0 see http : / / blog.sina.com.cn / bufengmobuchenghuo
uCOSII_44b0x_Keil
- 可以在ADS下跑的工程有很多,但在Keil下面的ucOS工程还没有.在这里,提供一个可以在Keil环境下跑起来的基于三星的44b0的ucOS工程,可以在RAM中调试.-ADS can run under the project are many, But in the following ucOS Keil works have not. Here, can provide an environment in Keil run up based on Samsung's 44 belts
ucosii_for 44b0
- 三星公司的ＡＲＭ７芯片S3C44B0X的ｕＣＯＳＩＩ操作系统源码-Samsung's chip ARM7 S3C44B0X uCOSII source operating system
RTOSICCAVR
- UCOS/II for ICCAVR - The version of UCOS/II is 2.04 - the original port was done by Ole Saether for the IAR compiler. Jens E. Holtegaard ported one version using ICCAVR. Joerg Meyer did another port (using Jens port as a start?). This
ucos2407-03.9.19
- 基于TI的2407移植的ucos程序范例-based on TI's 2407 transplant procedures example CENTER
adsp_BF533
- ucos在blackfin533上的移植。用ADI的visual dsp++ 编译。如果编译不能通过，请将*.ldf删除，让系统自动生成ldf文件。-CENTER blackfin533 in the transplant. Using ADI's visual DSP compiler. If you compile passed, I would be grateful if *. ldf deleted, so that the system automatically gener
mC_OS2
- uc/os 操作系统是经典的开放源码嵌入式操作系统，对于在嵌入式开发有兴趣的朋友来说，理解这个操作系统的源代码是非常必要的！-uc / os operating system is a classic open-source embedded operating system for embedded development in the interest of a friend, an understanding of the operating system's source cod
进程调度算法-操作系统
- 这是一个操作系统的进程调度算法的实现绝对正确-This is a process of the operating system's scheduling algorithm to achieve absolutely correct