搜索资源列表
yy
- Keil C51的UCOS-2操作系统源代码-ucos-2 operation system source code for Keil C51
keil8051
- 基于keil 51的UC/OS-II嵌入式系统。-Embedded system uC/OS-II based on Keil C51.
myucos2
- kei1 c51 移植的ucos2 直接运行我的工程文件可以进入shell界面 里面我修改堆栈地使用方法，内部中文解说-kei1 transplant operation ucos2 direct my engineering documents can enter inside my shell interface changes to the use of stack, internal Chinese Commentary
移植源码51ucosii
- ucos2 移植到C51的源码，经过本人验证可以使用，价值很好-C51 ucos2 transplanted to the source, after certification can I use, good value
uCOS-II 2.52在51上的移植程序独立喂狗任务
- ucos2 移植到C51的源码，经过本人验证可以使用，价值很好-C51 ucos2 transplanted to the source, after certification can I use, good value
uCOSii_for_8951_EXT_64k
- uCOS2 for 51系列，已经在SST89E564上测试通过，实验板要求有64K扩展ram，根据原来网上公开版本修改而成，附带提供在C51中利用函数指针带参数传递调用汇编接口例子和一个简单的shell界面-uCOS2 for 51 series, in SST89E564 testing, Experimental board requires 64K ram expansion, according to the original version of the Internet open
uc_uip
- 运行环境是keil。这是一个实现嵌入式TCP/IP的程序，运行在万邦的w78e516上面，网卡芯片采用的是rtl8019.程序中采用了uc/os提高实时性！-runtime environment is c51. This is a realization of embedded TCP / IP, the running of the IMC w78e516 above, the chip card is rtl8019. Procedures used in the uc / os impr
UcosIIfor8051
- UCOS在C51上实现的两个例子，可以直接在BC环境下运行-C51 UCOS in achieving the two examples that can be directly in the operating environment BC
SmallRTOS for C51
- 嵌入系统中使用C语言替代汇编一样,在嵌入系统中使用RTOS是大势所趋。原因主要是现在在大多数情况下编程效率比执行效率重要（单片机便宜嘛）。但纵观51的RTOS，keil c51 所带的RTX Full 太大（6k多），且需要外部ram，又无源代码，很多时候不实用。RTX Tiny虽然小（900多字节），但是任务没有优先级和中断管理，也无源代码，也不太实用。而ucosII虽有源代码，但是它太大，又需要外部ram，所有函数又必须是重入函数，用在51这类小片内RAM的单片机上有点勉强。于是，我借鉴uc
uC_OS-II_C51_LCD
- uC_OS-II在C51下的一个完整的LCD项目源码-uC_OS-II at C51 of a complete LCD project source
uCOS-iiKeilC51
- uCOS-II到Keil+C51小模式下的移植-uCOS-II to Keil+ C51 small mode transplant
uCOSIIfor51
- ucos-2 在keil c51 小模式下的移植-ucos-2 for 51
uCOS-II-C51
- ucos—ii成功嵌入89s52单片机实例-ucos-ii examples of successful single-chip embedded 89s52
ucosii
- ucos ii移植到keil c51环境下的源码-ucos ii transplanted to keil c51-source environment
UCOS51
- The embedded system UCOS II was implemented on a C51 MCU.
uCOS_transplanted
- uCOS-Ⅱ C51移植笔记，这是本人学习时的新得，希望与人分享-uCOS-Ⅱ C51 transplant notes, this is my time to learn new too, hoping to share with others
uCOS-II-for-Keil-C51
- 用keil对ucos进行编译，适用于单片机的ucos，配置以写好。-Compiled with keil on ucos for SCM ucos, configured to written.
uCOS-II-2.52-in-C51
- uCOS-II 2.52在51上的移植程序(大模式)-uCOS-II 2.52 in C51 transplant procedures
c51--ucosii-keil
- ucosii的C51移植+Proteus连接图-ucosii connection diagram of the C51 transplant+Proteus
C51-MCU-UCOSII-V2.84
- C51单片机UCOSII工程文档初始化创建了LED灯任务。定时器0作为时钟-C51 microcontroller initialization UCOSII engineering documents created with LED lights tasks. Timer 0 as the clock