搜索资源列表
mycsource
- use c develop just for all members
c6416_ucosII
- ucos-IIv2.52在TMS320c6416上的移植，刚完成，请站长查看，-CENTER-IIv2.52 TMS320c6416 in the transplant, has just been completed. please check station, thank you
patch-2.4.21-rmk2
- This just a test src.
ucos2V270for_m1620050518
- 原创！！！ 刚刚完成的ucos2 2.76 for 瑞萨m16/60 -original! ! ! Just completed ucos2 2.76 for Renesas m16/60
uCOS-III
- 这是刚刚推出的UCOS-III,我把它移植到我的板子上面了，感觉和其他的版本没什么驱动，需要学习的可以看一下-This is just launched UCOS-III, I ported it to the top of my board, feel, and no other version of the driver, can look to learn
ucos33ex
- 这个就是所谓ucos的33个例子，其实来自于任哲的一本书 不过我压缩成一个文件 只需下载这一个文件即可-This is the so-called uCOS of 33 examples, in fact, from the REN Zhe of a book but I just compressed into a file you can download this document
ucos_ltck
- 立体停车场演示系统设计任务： 1）双层自动停车场配置如图1示，上下层共可停9部车； 2）本停车场设计的规则为5、6、7、8、9车位只能上下移动，不能左右移动，1、2、3、4车位只能左右移动，不能上下移动； 3）下排车位只需直接将车子开出即可； 4）停车场入口处有称重台，若车载负荷过大，将提示重量过大，拒绝存放； 4）如需要呼叫上排车子，只要按下5至9的按钮，再按下[取车]按钮，则所按车位将降至下层，而下排车位将左右移动，让出位置让上层车位降下。 -Parking l
z-z80
- UCOSII使用Z80单片机开发，使用于刚熟悉操作系统的朋友，比较好用。-Z80 Singlechip UCOSII use development, familiar with the operating system used in just friends, more useful.
MenuetOSv085
- It is a very small and good OS, that is just use Assembly language.
DEX-OS
- It is a very small and good OS, that is just like Linux.
chrome-os-0.4.22.8-gdgt.vmdk
- development kit, do mot try it i just had to uploadit one nytiuyi-development kit, do mot try it i just had to uploadit one nytiuyi
ucosiifors3c44b0x
- ucosiifors4c44b0x just a demo but you can change it
RTOS_MDK--uCOS-II-for-STM32(LCD5110)
- RTOS_MDK uCOS-II for STM32（LCD5110)意法半导体cpu移植的uCOS2.52，诺基亚的LCD5510显示器，效果直接显示，很符合刚学uCOS系统的同学。-RTOS_MDK uCOS-II for STM32 (LCD5110) STMicroelectronics cpu transplant uCOS2.52, Nokia' s LCD5510 display the results directly show that the system is con
UCOS
- 在8051中实现分时操作，架构已经写好了！只需在标记的地方添上你要执行的程序就OK了-Implement time-sharing operation in 8051, architecture has been written! Just add the tag where you want to run the program on the OK
os
- 瑞萨 m16c ucos 源码 适合瑞萨M16C所有系列，只需要去改动中断地址就可以-Renesas M16C Renesas m16c ucos source for all the series, just need to change the interrupt address can be
uCOS--EX
- UCos 2开发应用，分析详细 明了，对刚学习UCOS很有帮助-UCos 2 development and application of clear, detailed analysis of just learning UCOS helpful
ADC_ucos2
- stm32f108c的ucos2移植，代码中开了5个线程，只是简单的控制下led,adc跟串口。-the stm32f108c the ucos2 transplant code open five threads, just a simple control led adc with serial port.
ALIENTEK_STM32_ucgui3.90
- 将ucgui3.90的源码完整移植至ALIENTEK_STM32的开发版上，没有裁剪，没有优化，不带库文件，完全裸奔运行，经测试，没有错误与警告，能够正常显示中文和数字，适合刚入门的朋友参考学习，KEIL4.10开发环境.-Transplanted to the development version of the ALIENTEK_STM32 ucgui3.90 source code integrity, cutting, optimization without the library f
Software
- UCOSIII 移植到 NXP LPC1768 纯净版。 方便大家其它功能的添加。 现在只是点亮LED灯。 添加串口，网口等功能正在进行中，有机会上传啦。-UCOSIII NXP transplanted to the LPC1768 version of pure. Add to facilitate other functions. Now just lit LED lights.
STM32PuCOSPISR
- 自己亲自移植的uCOS-II工程，用MDK（keil）编译的，基于STM32F103芯片。用到了1个串口，4个GPIO端口（1个按键中断，1个指示中断的LED，和另外两个LED分别代表两个Task）。如果有什么需要帮助的，里面有我本人的联系方式。 -I proted uCOS-II to STM32Fl03 MCU by MDK compiler.The project have used USART1 and 4 of GPIO which for Interrupt,LED of int