搜索资源列表
Usb
- 在ZLG的LPC211X开发板上没有D12 USB驱动的源程序，自己从LPC2210开发板上更改后的源程序，可以供大家参考。 文件： Usb.HEX Usb.mcp 等相关文件。
VSMforARM7
- 在Proteus 7.4 中的UCOS-ii的仿真效果图，和相关的bin，hex文件。-Proteus 7.4 in UCOS-ii of the simulation results map, and the associated bin, hex file.
LPC2000uCOS_II
- 在LPC2138实现的uCOS_II,建立10个任务，在一个LCD上显示随机数。内附有proteus的仿真图。（3.8以上的MDK编译器，需手动删除hex文件的倒数第二行，否则proteus不能运行）-In the LPC2138 achieved uCOS_II, the establishment of 10 tasks, an LCD display random number. Enclosed proteus simulation diagram. (3.8 and above MDK
ADC
- LPC2148驱动ADC ----- A/D模数转换 这个工作区 每个工程包含3个配置选项 ISP_iFlash_Hex - 生成.Hex格式的目标文件 JLINK_iflash - 通过JLINK来烧写内部Flash的配置 JLINIX_iram - 通过JLINK来在内部RAM中调试 工程名: LCD ----- LCD(包含了中断） MMC ----- MMC卡读写 Uart ----- 串口通讯 USBMouse ----- USB
LCD
- LPC2148 drive LCD ----- A / D conversion module The work area Each project contains three configuration options ISP_iFlash_Hex - generated. Hex object file format JLINK_iflash - JLINK to the programming through the configuration of the intern
MMC
- LPC2148 drive LCD ----- A / D conversion module The work area Each project contains three configuration options ISP_iFlash_Hex - generated. Hex object file format JLINK_iflash - JLINK to the programming through the configuration of the intern
PWM
- LPC2148 drive LCD ----- A / D conversion module The work area Each project contains three configuration options ISP_iFlash_Hex - generated. Hex object file format JLINK_iflash - JLINK to the programming through the configuration of the intern
Uart
- LPC2148 drive LCD ----- A / D conversion module The work area Each project contains three configuration options ISP_iFlash_Hex - generated. Hex object file format JLINK_iflash - JLINK to the programming through the configuration of the intern
USBMouse
- LPC2148 drive LCD ----- A / D conversion module The work area Each project contains three configuration options ISP_iFlash_Hex - generated. Hex object file format JLINK_iflash - JLINK to the programming through the configuration of the intern
GUI_HELLO
- ucos以及zlggui的设计，使用keil for arm，在proteus中仿真通过。在仿真的时候需要删除hex代码的倒数第二行，不然不能仿真。-ucos and zlggui design, use keil for arm, in the simulation in proteus by. When the simulation need to remove the last line of hex code, or can not be simulated.
keilc
- keil c基本使用，包括工程建设，芯片选择，编译，生成hex文件-keil c basic use, including construction, chip select, compile, generate a hex file
hex
- 本程序基于USART协议，向STM32板上烧写程序，新手向，参数修改在rs232.cpp中，还有要烧的文件名在abccDlg中修改，望大家共同学习-This procedure is based on the USART agreement to the STM32 board programming procedures, novice, parameter modification in rs232.cpp, as well as modify the file name to burn i