搜索资源列表
CLKCP01
- 液晶显示器320*240脉冲实现，每出现12个clk出一个字节脉冲，每出现40个字节脉冲出一个行脉冲。240行结束出一个帧脉冲.-LCD 320 * 240 pulse realized there every 12 clk byte out a pulse, with each 40-byte burst out a pulse line. 240 firms from the end of a frame pulse.
unicntr
- 通用寄存器的部分代码 LIBRARY IEEE USE IEEE.STD_LOGIC_1164.ALL ENTITY traffic IS PORT(clk,sm,sb:IN bit mr,my,mg,br,by,bg:OUT bit ) END traffic -part of the general purpose registers IEEE code LIBRARY USE traffic IEEE.STD_LOGIC_1164
fifo_VHDL
- 该文件是先入先出fifo的源代码和测试文件-the document is first-in-first out fifo the source code and test document
fifo88
- 8*8位的先入先出（fifo）数据缓冲器的vhdl源程序-8 * 8 of the first-in-first out (FIFO) buffers the data source VHDL
good_CPU
- 本代码是在modelsim下运行的模拟8×8位的CPU，执行程度，对深入理解CPU设计和运行原理具有重要意义- This code is simulation 8脳8 position CPU which moves under modelsim, carries out the degree, to thoroughly understood the CPU design and the movement principle have the vital significance
I2C_1.1
- Simple I2C controller -- 1) No multimaster -- 2) No slave mode -- 3) No fifo s -- -- notes: -- Every command is acknowledged. Do not set a new command before previous is acknowledged. -- Dout is available 1 clock cycle later as cmd_a
LCD_fullscreen
- 这是本人写的可显示128*64LCD全屏汉字的程序,直接下到片子里即可出现象(需自己定制ROM).想显示第二屏的话只需加一个状态即可.-I write this is the display of 128 * Embedded full screen characters procedures, directly to the unit under the blankets will be out phenomenon (it-yourself customized ROM). to the s
MVHDL
- 本程式為並列flash ROM之控制程式, 可將flash rom的資料讀出後, 經過CPLD controller將圖檔轉成VESA影像訊號, 輸出至螢幕, 本程式已經過硬體驗證-the parallel program for controlling flash ROM programs, rom flash can be read out information, After drawing CPLD controller will turn into VESA video signal
verilogfifo
- verilog HDL实现先进先出栈，不含测试文件-verilog HDL achieve first-in first-out stack, non-test document
duogongnengdianzizhong
- 具有整点报时功能,整点时响铃5s。具有控制启动和关闭功能。 具有调整起床铃,熄灯铃时间的功能。 具有调整打铃时间长短和间歇时间长短的功能。 -with whole point timekeeping function, the whole point ringing 5s. Have control startup and shutdown functions. Get up with adjustments bell, lights-out bell time function.
tom08
- SRAM 视频采集测试程序 读写时序控制 为解决时钟切换而做的测试程序-SRAM test sequential read and write control procedures to resolve the clock switching out of the test procedure
jiaotongdengcodes
- 实例制作的一个有关交通灯的VHDL代码，从各模块到顶层文件的代码一一列出，详细周到，附带仿真波形图和芯片管脚锁定的相关内容，绝对物超所值。-produced an example of the traffic light VHDL code, from the module to the top of the document sets out a code on January 1, thoughtful details, fringe simulation waveform map and
CompilerOptimizations
- To increase simulation speed, ModelSim® can apply a variety of optimizations to your design. These include, but are not limited to, mergingprocesses, pulling constants out of loops, clock suppression, and signal collapsing. You control the level o
aqusition
- 此程序用于视频采集过程中CPLD对时序的转换与组合代码，每两行采集一行，两列采集一列，减小数据量，同时能保证采集完整的一幅图像（输出OUT用于DSP或者单片机中断）
数据结构c描述习题集答案
- 减1计数器 一、设计要求 用Verilog HDL语言设计一个计数器。 要求计数器具有异步置位/复位功能，可以进行自增和自减计数，其计数周期为2^N（N为二进制位数）。 二、设计原理 输入/输出说明： d：异步置数数据输入； q：当前计数器数据输出； clock：时钟脉冲； count_en：计数器计数使能控制（1：计数/0：停止计数）； updown：计数器进行自加/自减运算控制（1：自加/0：自减）； load_d-a counter a reduction, design requirem
multiplier
- 在MAXPLUSII下实现BOOTH算法，可以进行任意位K×K的乘法-BOOTH algorthim implemented in the MAXPLUSII environment, which can carry out arbitrary bits multiplication.
移位寄存器
- First in first out寄存器的verilog源代码
VHDLcodes.rar
- 给大家分享下一些VHDL的VGA小程序，大家共同学习，如有不足，请指出，便于共同提高。,To share with you some of the VGA small VHDL program, we learn, is insufficient, please point out that to facilitate common.
mux_reg
- VHDL code for a multiplexer and a parallel/serial in parallel/serial out shift register
the-design-of-string-out-of-register
- 利用FPGA编程-------实现“并入串出寄存器设计”-Use of FPGA programming-------incorporated into the design of string out of register