搜索资源列表
TLC5615
- 以VERILOG语言描绘的TLC5615的驱动程序-Described in VERILOG language driver TLC5615
DATLC5615
- FPGA 驱动tlc5615 程序。高度集成-FPGA PROGRAM OF TLC5615
Dac
- 这是一款用VHDL语言编写的对外部DA芯片的控制程序，所用DA转换芯片是TI公司的TLC5615.-This is a VHDL languages used on the external DA chip control procedures, using DA converter chip is TI
tlc5615
- TLC5615串行DA的驱动接口,采用verilog编程-TLC5615 driver DA serial interface using verilog programming
adda
- TLC549进行模数转换后在通过tlc5615数模转换出来！结果下载证明可用-TLC549 analog to digital conversion digital-analog conversion through tlc5615 out! The results prove that is available to download
verilog_DA_TLC5615
- verilog 写的硬件示波器设计检测频率为1K~10KHz-verilog 1K~10KHz test
FIR2
- 以VERILOG语言描绘的用TLC549和TLC5615的数字低通滤波器的程序-VERILOG language used to describe the TLC549 and TLC5615 digital low pass filter process
dds
- 采用verlog编写的tlc5615驱动程序，并利用了rom核实现了dds功能-Using verlog written tlc5615 driver, and use the rom-core functions to achieve a dds
_12_DA[TLC5615]_1
- 通过DA输出正弦波，频率1KHz ad采用的是TLC5615 输出的正弦波与理想波形基本一样-DA output sine wave frequency 1KHz The ad is TLC5615 The sine wave output with the ideal waveform is basically the same
TLC1556
- 使用10位串行DA芯片TLC5615将数字信号转换为模拟信号，开发板DA芯片VDD=5V,VREF=3.3V 计算公式：Vout=VREF*(N/1024) N为10位二进制码-Use DA chip TLC5615 10 serial digital signal into an analog signal, the board DA chip VDD = 5V, VREF = 3.3V formula: Vout = VREF* (N/1024) N is 10-bit binary
tlc5615
- 基于FPGA 的tlc5615 的实现，经过了自己的验证，能正常使用-Tlc5615 FPGA-based realization, through its own validation, can be used normally
TLC5615_1k
- 进阶实验_12_DA[TLC5615]_1：通过DA输出正弦波，频率1KHz-Advanced experimental _12_DA [TLC5615] _1: By DA output sine wave, frequency 1KHz
TLC5615_1-10k
- 进阶实验_13_DA[TLC5615]_2：通过DA输出方波，频率可调，1K~10KHz，步进1K-Advanced experimental _13_DA [TLC5615] _2: By DA output square wave, frequency adjustable, 1K ~ 10KHz, stepping 1K
DA_TLC5615s-Voltage-on-Digital-tube
- 使用10位串行DA芯片TLC5615将数字信号转换为模拟信号，开发板DA芯片VDD=5V,VREF=3.3V 计算公式：Vout=VREF*(N/1024) N为10位二进制码 最后使用开发板上AD芯片TLC549将电压显示于数码管上-use 10 serial DA TLC5615 and display on digital tube
DA_TLC5615_breath-led
- 使用10位串行DA芯片TLC5615将数字信号转换为模拟信号，开发板DA芯片VDD=5V,VREF=3.3V 计算公式：Vout=VREF*(N/1024) N为10位二进制码 ** 操作过程：根据需求，在程序改变10位二进制数，在DA芯片的Vout脚输出相应电压-breath led
DA_TLC5615
- 用FPGA控制DA芯片TLC5615实现数模转换，verilog语言-DA control with FPGA chip TLC5615 to achieve digital to analog conversion, verilog language
Tlc5615_Dac
- 基于VerilogHDL的TLC5615控制模块的设计-Design of TLC5615 Based on FPGA