搜索资源列表
fongen2006
- 從TureType字檔提取出字體並解碼出LCM點陣字碼的範例.-TureType word from the extracted file and print out LCM lattice decoder code examples.
MyPrinter-N
- LPC2200下的打印程序，利用windows生成的打印文件，将内容拷到程序文件中即可打印-LPC2200 under the Print procedure, and use windows generated print file, Kaodao content to document procedures can be Print
ConvertToHex
- 将打印文件转换为十六进制文件，LPC2220打印该文件可实现打印-to print documents to hexadecimal documents, LPC2220 Print the document can be realized Print
msp430f449PRINT
- msp430f449PRINT.rar 用msp430f449实现串行打印的程序。经过验证-msp430f449PRINT.rar with msp430f449 Serial Print procedures. Validated
ARM_EPSON_Driver
- 我写的基于NXP ARM7 的EPSON微型打印机驱动程序，其打印格式可根据自己的需要修改。此程序已成功用于一个比较大的项目。-I write NXP ARM7 based on the micro-EPSON printer driver, its print format according to their needs to be revised. This procedure has been successfully used for a relatively large projec
Sendstr
- print hello world on the serial port at Windway ARM development board
V1.0_TFT_ILI9320 ILI9320控制器
- 2.0寸彩屏驱动240*320分辨率，ILI9320控制器，含有基本驱动函数和基本图形显示函数例如：画线，画点，画圆，画矩形，打印字母，打印汉字，输出图像等。-2.0-inch color display driver 240* 320 resolution, ILI9320 controller, containing the basic driver functions and the basic graphics functions such as: drawing lines, draw
ddd
- 配合hzk16可以在屏幕上打印点阵汉字，可以用于测试hzk16，或用于其他相关。-With hzk16 can print dot matrix characters on the screen can be used to test hzk16, or for other related.
FINGERPRNTCODE
- finger print based security system
12864
- 12864 的驱动文件，串行方式。移植的时候只要更改3根信号线。包含可整数显示，浮点数显示-the driver of 12864 lcm,with the function to print long,double
stmsky001-USART
- stmsky001-USART STM32103ZET6 UART 资料 printf 打印函数-stmsky001-USART STM32103ZET6 UART data print function printf
25touchpanel
- 配置LPC2478处理器I/O端口的模块； 编写程序定时读取触摸屏的X、Y坐标数据，并通过串口打印。 -Configure LPC2478 processor I/O port module programming time to read touch screen X, Y coordinate data, and print through the serial port.
8051_printer
- print string with dot matrix printer using 8051 microcontroller
SM-Series-Finger-Print-Sensor-SourceCode
- SM Series Finger Print Sensor SourceCode. for example SM20.
Exp2
- C++ ARM实现字符打印,你输入数据，就打印机个字符-C++ ARM print string
HOPENcb
- 在HOPEN下开发的抄表系统，具备打印、转码、抄表、收费、查询等完整的电表抄表功能-Developed under the HOPEN meter reading system, with print, transcoding, meter reading, charges, inquiries and other full meter meter reading function
finger-print-new
- bio enabled robot control
power-test
- 这是用VB6.0开发的一款电力仪表测试软件,用与测试相关的参数,并且打印报表-This is the development of a power meter VB6.0 test software, with test-related parameters, and print reports
KU007-Plus-programming-manual
- 可编程键盘KU-007 打印控制程序编程手册-Programmable Keyboard KU-007 Print Control Programming Manual
Print
- 支持格式化函数的实现，在arm7上试过，其中串口部分代码在修改-Support the implementation of formatting functions, tried on the arm7, which part of the code in the serial changes