搜索资源列表
shenlongka
- 这份源码已提供了神龙卡的控制接口的全部源码，接口文件sdinterf.pas，但这个演示源码只是个能控制神龙卡调用，我只提供调用神龙卡的方法，但全部功能我还没有写上，就让刚做神龙卡编程（DSHOW）的朋友提供个方便吧！这样就不用花太大的力气去找到编程的入口点，还有如果你写出好的代码不防发布出来大家分享下！-this source has provided Shenlong control interface cards all the source code, sdinterf.pas inte
flash_fs
- FLASH文件系统的源码，Flash memory is a nonvolatile memory, which allows the user to electrically program (write) and erase information. The exponential growth of flash memory has made this technology an indispensable part of hundreds of millions of
DE2_SDCARD.rar
- 在de2上用niosii实现fat文件系统源代码，可以实现文件的读写操作，介质为sd卡。,In the de2 on the file system using niosii to achieve fat source code, the file read and write operations can be achieved, the medium for the sd card.
SD_Card
- 基于MSP430F149的SD卡驱动程序，选用的是SPI模式，可实现基本的数据读写，注： 次程序不带FAT文件系统，故不能实现对文件操作，小弟初出茅庐，望多多指教。-MSP430F149-based SD card driver, use the SPI mode allows basic data read and write, Note: meeting program without the FAT file system, it can not be achieved for file
kfd
- 实现模式识别KFD学习算法预防老年人跌倒，利用keil调试，是学习嵌入式和模式识别的好资料~-This section presents the example C code of the proposed solution-based ADXL345 and ADuC7026 platform. There are four .h files and one .c file in the project, compiled by Keil UV3. The FallDetection.
U-Disk
- U盘读写协议:我开发U盘的重要参考代码。 bulk_only传输协议，FAT16文件系统.-U disk read and write an agreement: I developed an important reference U disk code. bulk_only Transfer Protocol, FAT16 file system.
srrial.c
- READ SERIAL PORT AND WRITE INTO a FILE
i2c_gpio
- This file contains routines to write to and read from the I2C bus using the GPIO pins of the CS5530. -This file contains routines to write to and read from the I2C bus using the GPIO pins of the CS5530.
FreeRTOS_LEDBlink_WinAVR
- Micro: AVR Program: This program shows how to use FreeRTOS and write simple LED blinking application. - Extract the archive file into separate folder. - Use Eclipse IDE and open that folder, using Open Workspace option. Compiler : WinAV
INTELD845GVSRM50FW040K
- This most required file for the Intel Mother Board Bios This file is for Intel D845GVSR in .bin format you have to be write using EProm Programmer-This is most required file for the Intel Mother Board Bios This file is for Intel D845GVSR in .bin form
zlg_fs_ffs
- zlg ffs支持写平衡的NAND FLASH的文件系统可移值到ARM等处理器中-zlg ffs support to write a balanced NAND FLASH file system portability to other ARM processor
FAT32
- 通俗易懂，是写FAT32文件系统的重要资料-Easy to understand, is the FAT32 file system to write essential information
LCD_with_PCF8566
- this file describes the functions to write a message to the lcd. the host controller used is the MSP430F135. the driver to interface the lcd with the host controller is the PCF8566.
ball
- 运用定时器和独立按键写的一个篮球记分牌，用到10位数码管，74ls138，内有protel文件。-The use of timers and independent keys to write a basketball scoreboard, use 10-bit digital tube, 74ls138, there protel file.
SDCARD_FATFileSystem
- [FAT文件系统读写程序（目前在已经在fs2410开发板上经过sd卡测试，实现多级目录，文件的创建读写，24位bmp的读写），对FAT16文件系统进行了改进，主要是引入了缓冲队列，同时对缓冲队列使用了hash表的管理-[FAT file system read and write program (current board has been developed in fs2410 sd card test, multi-level directory, file creation readin
Atmega8
- 机器人程序,Atmega8是前后传感器小板上的芯片的程序（前后都有，但用的是同一个程序），它将数据处理后通过异步串口（uart）传给主芯片。*_project是完整的工程文件，很多文件是编译器自动生成的，只有.c和.h的文件是自己写的，我把它们单独放在*_useful里了。提示一下：1. config.h中定义了所有的引用（include），其他xxx.h中引用config.h，相当于引用了所有的需要的xxx.h。 2. 每一个xxx.c文件都和一个同名的xxx.h文件对应（main.c和c
Atmega128
- 机器人程序,Atmega128是主芯片程序。*_project是完整的工程文件，很多文件是编译器自动生成的，只有.c和.h的文件是自己写的，我把它们单独放在*_useful里了。提示一下：1. config.h中定义了所有的引用（include），其他xxx.h中引用config.h，相当于引用了所有的需要的xxx.h。 2. 每一个xxx.c文件都和一个同名的xxx.h文件对应（main.c和config.h除外），xxx.h引用config.h并定义所有xxx.c中的函数，以便yyy.c
ExRam
- 本程序是访问外部RAM空间，与外部RAM可以实现读写数据当程序比较大时，在仿真时，内部18K的RAM无法满足空间需求的情况下，可以将文件下载到外部扩展的RAM空间，当然，此时，需要对CMD进行相应的配置。 本实验中，请在RamRead(0x4000)这一行设置断点，当运行至断点时，点击view然后点击memory来查看存储空间，Address填写0x00100000，点击ok，就能看到0x00100000开始，各个存储单元的值从0开始递增。-This procedure is to acce
rtdsr_0.6_src.tar
- rtdsr v0.6 - RTD 1283 bootloader recovery (sources)-rtdsr: Serial Recovery utility for Realtek RTD1283/Mars SoCs This program is meant to be used in the Serial Recovery console from the Realtek RTD1283 SoC BootROM ("s/d/g/c>"). It provides
MP3-and-SD-card-file-code
- MP3代码和SD卡文件，包含VS1003解码芯片程序，SD卡及FAT文件系统的读写方法，液晶显示程序，收音机模块操作，音频处理程序，是你自己动手DIY个性化MP3的重要参考-MP3 code and SD card files, the program contains VS1003 decoder chip, SD card and the FAT file system read and write methods, liquid crystal display program, a rad