搜索资源列表
一款南方CASS的应用小程序
- 一款南方CASS的应用小程序，修改符号，内插高程点及断面的提取等。-The application of a small Southern CASS program, modify the symbols, interpolated elevation and section of the extraction point.
DataPoint 实现将igs点云数据读取并存入数据库
- 实现将igs点云数据读取并存入数据库，并将点云在solidworks中实现点云输出-Igs to achieve the point cloud data read and stored in the database, and point cloud point cloud in solidworks to achieve output
zbbz
- 可以标注一些CAD图上点距,距离之类. 标注CAD图上点位的二维坐标。-CAD map to mark a number of dot pitch, the distance and the like. Marked point on the CAD map two-dimensional coordinates.
work
- 基于cad的地质界面钻探点及钻探线的三维显示，数据库为access，具有全部显示和查询显示的功能-Cad-based point of geological drilling and drilling line interface, three-dimensional displays, database is access
Apll
- 数控线切割机编程中，“三切圆”中，作一圆与已知的一个点和两条线相切-Wire EDM digital control programming，"tangent circle with three elements" To make a circle tangent to known a point and two line.
zbbz
- 采用lisp编写,点位标注功能，标注时是按当前的UCS的，但是数值还是 WCS 的。内含说明，方便学习！-Prepared using lisp, point tagging feature, marked by the current UCS when, but the value is WCS' s. Includes instructions for easy learning!
DispPoint
- Autocad多功能展点程序，可以实现CASS数据到常用数据以及常用数据到CASS数据的转换-For Autocad multi-functional exhibition point program, CASS data to common data and common data to CASS data conversion can be achieved
gc
- 通过图面上的等高线 获取等高线之间的高程点 用于高程点加密（须有cass配合）-Contour through the surface between the contour lines for elevation point for the elevation point encryption (must have cass match)
hhqx
- 用多义线摹拟通过ＨＹ点的缓和曲线。 输入起始切线、终止法线、缓和曲线终止点。 命令：ＥＬＩＮ１- With a polyline through the HY-point mimic the relaxation curve. Enter the start tangent, normal termination, the termination point of transition curve. Command: ELIN1
mytrim
- 可点可框的修剪LISP源代码 修正CAD自带的修建功能-Can point to box trim LISP source code comes with the construction of correction functions CAD
CADdrawingstandardgear
- CAD画标准齿轮的二次开发代码，打开CAD后，点选项加载，然后命令行输入gear，按提示输入数据。可生成三维齿轮。-CAD drawing standard gear of the secondary development of the code, open the CAD, the point of loading options, and then the command line input gear, prompted to enter data. Can generate three
dbg
- 用lisp语言编写的双侧堤坝，只需在cad中的命令栏输入命令后，根据用户的需求在图上指定相应的点即可。-Written with a lisp bilateral dam, just enter the command bar cad in the command, according to the needs of the user specified in the corresponding point on the graph can be.
zd
- 用于地形图测绘中的展点，即将用全站仪测绘后的数据导入cad中进行展点，以便于后面的工作！-For topographic mapping in the development of point soon after the use of total station mapping data into the cad in the exhibition points to the work in the back!
Appc
- 数控线切割机编程中，“三切圆”中，作一圆与已知的一个圆和两个点相切-Wire EDM digital control programming，"tangent circle with three elements" To make a circle tangent to known a circles and two point.
123
- 在AUTO CAD 中运行，采用LISP编写，实现在cad中对采集的地形点进行检查的功能。-Running in AUTO CAD, the use of LISP prepared to achieve in the cad in the point of collection to check the terrain features.
find_submain
- 计算等高线与多段线的交点,从而求出多段的高程-calculate the inter point of contours and pline
Ask_Spline_Face_data
- 本示例段演示了从点云创建曲面的操作，然后从曲面上抽取一条等参数线作为加工曲面时的切触点轨迹线，把该切触点轨迹线离散得到单个的切触点。对于曲面上的每个切触点，访问曲面在该点处的信息并采用球头刀加工时刀尖点的位置并从该点画出刀轴所在的直线。在此程序段中，刀轴矢量默认为与z轴平行,对应书中5.8.3中的示例程序。 运行要求: （路径上不能有中文）1、打开UG NX3.0或以上版本，新建一个.prt文件 2、使用快捷键"Ctrl+U"，出现选择对话框，选择程序所在的位置。 使用"Fit"功能
333
- AutoCAD二次开发，用于标注拐点坐标的小程序-AutoCAD second development, marked the turning point for the coordinates of the applet
SPSS(5.0)(2010-12-30)
- CAD二次开发用ObjectARX.实现三维软件开发-Surface reconstruction, CAD second development with ObjectARX. Achieve 3 d software development use B spline curve reconstruction 3 d point cloud model
breaking-line-at-intersect-point
- 实现在线交汇处打断于点。lisp源码，在cad命令行打appload加载即可使用-breaking line at intersect point