搜索资源列表
cpress_extr_intr
- The purpose of this example is to demonstrate that the functioning of External interrupts (INT0, INT1, INT4, INT5 and INT6) and how toset them up. This directory contains the frameworks fw.c, the test program extr_intr.c and the externa
int9
- 基于asm汇编语言实现的是在pc系统中int9中断功能的部分示例,只在说明机制,进行学习,不能实际应用-asm compilation based on the language of the pc systems int9 interrupts some examples of the notes only mechanism for learning, not actual application
light-interupt
- 流水灯显示外部中断，中断后使流水灯向反方向循环亮灭，P1口输出。-Water light show external interrupts, interrupt the water cycle bright light off in the opposite direction, P1 port output.
lab21
- work with AVR AT90S8515 microcontroller. Work with timers and interrupts.
2009S3C2410init.S
- 2410Init.s包括了板子上电后的初始话，具体有几个步骤： 讲述S3C2410启动程序设计 1. 屏蔽所有中断，关看门狗。 2. 根据工作频率设置PLL寄存器 3. 初始化存储控制相关寄存器 4. 初始化各模式下的栈指针 5. 设置缺省中断处理函数 6. 将数据段拷贝到RAM中，将零初始化数据段清零 7. 跳转到C语言Main入口函数中-2410Init.s including the board after t
LAB5_Group11
- Develop an embedded system application by utilizing a timer module with interrupts to create some required cycles. You will try to configure the SFRs of PIC18F452 MCU to get the job done.
1
- 汇编计时器，很简单的一款计时器，利用中断-Assembly timer, a timer is very simple to use interrupts
interrupts
- 8051 interrupt handling
speed
- 利用汇编语言中的ACSII码和键盘中断，显示中断等指令控制显示，显示的是一个小车和字符小鸟的飞翔-ACSII using assembly language code and keyboard interrupts, interrupt and other commands control the display shows, shows and characters of a bird' s flying car ... ...
irq
- irq test for simulatinng all types of interrupts
vectors2407
- Vectors.ASM file for vector interrupts of MCK2407 embedded board from TI Third Party Technosoft.com.
2011-06-11
- 基于汇编语言的接口程序，包括模数转换和数模转换及中断的利用，并在数码管上或者房管二极管来验证。-Assembly language-based interface program, including analog-digital conversion and digital to analog conversion and the use of interrupts, and digital control room on the tube or diode to verify.
huibianzuoye
- 用画直线的方法画出并显示名字，用多重循环实现名字的移动和中止，音乐的播放和中断，系统时间的读取，最终返回系统。-Draw a straight line with a painting method and display the name, the name used to achieve multi-cycle and stop the movement, music playback and interrupts, the system time to read, and ultimat
SS
- this program runs the screen saver(Blank screen) when the keyboard is idle for 10 seconds.In this program I have used two interrupts 08h and 09h.
rtc
- this program runs the Real Time Clock .In this program I have used two interrupt 08h which is timer interrupt.It interrupts micro-processor 18.2 times in 1 second.
IRQ
- 此代码为NXP公司LPC2000周立功开发板提供的汇编代码，主要处理嵌入式嵌套中断问题-This code is compiled code from NXP LPC2000 development board provides Zhou, who mainly deal with the problem of embedded nested interrupts
shuzizhong
- 使用8254和8259芯片利用中断实现数字钟。-Using the 8254 and 8259 chips use digital clock interrupts.
clock
- 在C51上实现的时钟，原理是利用中断，可调节时、分、秒单位，好用。-The clock on the C51 achieved, the principle is the use of interrupts, adjustable hours, minutes, seconds units, easy to use.
password
- 单片机密码锁源程序和原理图：用4*3的键盘组成0~9的数字键及确认键、删除键；用8位数码管组成显示电路提示信息，当输入密码时，只显示“—”，当密码位数输入完毕按下确认键时，对输入的密码和设定的初始密码进行比较，若密码正确，则开锁，此时P3.0口的LED（即黄灯）亮一秒作为提示；若密码不正确，禁止输入3秒种，同时发出报警声。初始密码为8位。 增加功能：利用外部中断0和1分别实现复位和密码修改功能 -SCM locks source code and schematics: 4* 3 ke
ex2
- 循环彩灯控制 用5个开关控制P0口所接8个灯的循环， 1. K1-K2用于选择灯的四种循环方式 2. K3控制灯循环的方向 3. K4用于选择灯的循环速度 4. K0用于引发外部中断，在外部中断时，才可以通过K1-K4对点亮方式进行控制-Lantern cycle control 5 switches to control the lights connected to P0 port 8 cycles, 1. K1-K2 for four kinds of loop mod