资源列表
电子琴
- 电子琴程序,硬件 p2.6经过两个三极管9013放大 接上一块小喇叭--Piano program. Hardware p2.6, amplified by 2 triode 9013, then connected with a small speaker.
ST7626_Inintal
- LCD驱动 IC:ST7626 的初始化代码
s3c2410-double-led
- 基于ARM，s3c2410的led显示程序，可实现8位数码管的显示，可控制任意数码管点亮与关灭。-Based on the ARM, s3c2410 the display program led to the realization of an 8-bit digital tube display, can be controlled with any clearance digital tube lights out.
DAC
- 利用MSP430來實現DA轉換罕布錯用的-MSP430 to realize the use of DA converters used in the wrong Hampshire
I2S_Controller
- 与DE2相配套的LCM液晶显示屏的程序源代码-Matched with DE2 LCM LCD source code
并串转换XILINX
- 嵌入式中实现并串转换的VERILOG程序+VHDL程序两个版本，是xilinx版本的，权威但繁琐
8bitBoothMultiplier
- this booth multipler in verilog-this is booth multipler in verilog
p2r_CordicPipe
- p2r vhdl code for general use
ch01
- 1 bit comparator Consider a 1-bit equality comparator with two inputs, i 0 and ii, and an output, eq. The eq signal is asserted when i0 and il are equal truth table: input output iOil eq 0 0 1 0 1 0 1 0 0 1-1 bit comparator Con
vhdl_key
- 由vhdl语言实现的小键盘控制文件，能实现消抖和4*4矩阵小键盘的扫描-Vhdl language from the keypad control file, to achieve debounce and 4* 4 matrix keypad scanning
31296363kmeans1
- 图像分割，能够很好的提取运动图像，比较清晰。-Image segmentation, the extraction of moving images can be very good, relatively clear.
vhdl_code
- 用VHDL语言设计实现一个74LS138/8位移位寄存器译码器。-74LS138——code