资源列表
led_keyboard
- 用verilog语言实现键盘的移动扫描，这是基于ise实现的。 -Verilog language keyboard with a mobile scanner, which is based on the ise to achieve.
counter
- 一个用数码管自动计数的verilog程序，DE2开发板实现-An automatic digital control procedures verilog count, DE2 development board implementation
cordic
- VHDL写的通用调制解调器的核心程序，通过调试 无错无警告-VHDL generic modem to write the core of the procedure, through no fault debugging without warning
StateMachine-based
- FPGA上的利用状态机实现的分频的verilog程序-verilog source code StateMachine-based for FPGA
UART
- 基于NIOS2的串口初始化设计程序，在应用中只要加上这个初始化就可完成所有的初始化任务-Based on the serial port initialization NIOS2 design process, in applications, coupled with this initialization can be completed as long as all of the initialization task
51-RS232
- 51单片机通过串口与PC通讯,PC 发送指令到MCU,MCU接受到指令控制继电器动作，并返回PC。-51 MCU through serial communication with PC, PC to send commands to the MCU, MCU control relay received commands, and return PC.
PWM
- PIC16F877，PWM的相关信息和源代码，希望对大家有所帮助-PIC16877，PWM related information
24c02
- 51单片机24c02驱动程序，可以驱动外部储存器-51 microcontroller 24c02 driver
zeroForcingSimulation.m
- zero forcing receiver ber performance and analysis rayleigh channel for MIMO technology-zero forcing receiver ber performance and analysis rayleigh channel for MIMO technology
Mot_drvb
- 步进电机控制，汇编源代码，子程序，仅供参考。-Stepper motor control, the assembly source code, subroutines, for reference only.
stm8_play_alarm_voice
- stm8发出警报声的最简程序.将这个程序放在tim4里面,10ms进一次中断.另在tim3里面加io翻转函数,tim3中断设为1ms.就能发出标准的报警声音,还可以修改立即数,以发出不同的报警声腔,甚至是鸟叫声等.-stm8 play alarm voice
quicksort102
- 实现快速排序主要是采用指针的方式来随机产生大量数并排序-The realization of quick sort is the main way to target a large number of randomly generated number and sort